0
Starter Removal & Installation 1. Disconnect the negative battery cable. 2. Raise and safely support the vehicle. 3. Remove the starter terminal cover. 4. Remove the terminal nut and separate the battery starter cable from the starter motor. 5. Disconnect the solenoid (S) terminal connector, if equipped with a starter mounted solenoid. Ø To disconnect the hard-shell connector from the solenoid (S) terminal, grasp the plastic shell and pull off; do not pull on the wire. Pull straight off to prevent damage to the connector and (S) terminal. 6. Remove the starter motor retaining bolts. 7. Remove the starter motor from the vehicle. To Install: 8. Place the starter motor in position and install the starter motor retaining bolts. Tighten the bolts to 15-20 ft. lbs. (20-27 Nm). 9. Install the battery starter cable and a terminal nut to the starter motor. Tighten the terminal nuts to 79 inch lbs. (9 Nm). 10. Connect the solenoid (S) terminal connector, if equipped with a starter mounted solenoid. 11. Install the starter solenoid safety cap. If equipped. 12. Lower the vehicle. 13. Connect the negative battery cable. Start the engine several times to check starter motor operation.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Where is the starter relay for 1999 Lincoln Navigator?
tell me how to replace a starter in a Lincoln navigator"?
Where is the starter solenoid for a Lincoln Navigator?
The starter solenoid is inside the starter
How to diarm the factory alarm on a 2000 Lincoln navigator?
how to disarm the factory alarm on a 2000 lincoln navigator
How much does a Lincoln Navigator weight?
my 2000 Lincoln navigator weighs 6700 lbs.
What kind of engine oil does a 2000 Lincoln navigator use 5w30 or 10w30?
According to the 2000 Lincoln Navigator Owner Guide ( 5W-30 )
Power relay 2000 Lincoln navigator air suspension?
how you find a air suspension relay in a Lincoln navigator
What kind of motor oil you need to buy for a 2000 Lincoln Navigator 2000 Lincoln Navigator?
According to the 2000 Lincoln Navigator Owner Guide ( 5W-30 ) * with engine oil filter change , 5.7 litres / 6.0 U.S. quarts of 5W-30 engine oil
Where is the cylinder 5 for 2000 Lincoln navigator 5.4?
On a 2000 Lincoln Navigator : firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of vehicle
Owners guide for a 2000 Lincoln Navigator?
You can view the 2000 Lincoln Navigator Owner Guide online at : www . motorcraft service . com ( no spaces ) Click on Owner Guides
Where is the air switch on a 2000 Lincoln Navigator?
On a 2000 Lincoln Navigator : The switch for turning OFF the air suspension compressor is located in the front passenger footwell , by the kick panel
How much engine oil does a 2000 Lincoln Navigator require?
A 2000 Lincoln Navigator needs 6 quarts of oil, and the recommended viscosity is 5W20. ========================================================= The 2000 Lincoln Navigator Owner Guide shows to use ( 5W-30 ) The 6.0 U.S. quarts with engine oil filter change is correct
Where is the air control valve located on 2000 Lincoln navigator?
Show me where that air valve control valve is located on a 2000 navigator
