If you mean the switch that turns on the brake lights when you put the brakes on , it is above the brake arm of the foot pedal.
in the lamp assy. Mercury switch
on the side of the transmission
The neutral start switch mounted on your automatic transmission also serves as the back up lamp switch.
It is located on top of the steering column, just below where the column bolts to the dash.
A lamp holder that turns on from a wall light switch not a switch on the device.
Most likely cause would be the stop lamp switch, located on the brake pedal. Do you know the code? If the code is C1200 then it IS the stop lamp switch. Just remove the underdash panel and you can see and replace the switch.
The turn signal flasher is incorperated with the Hazard lamp switch. The switch must be changed,then the directional lamps will work correctly.
no because when you remove the lamp the circuit is still open; even if the switch is on
The stop lamp switch is on a bracket above the brake pedal.The stop lamp switch is on a bracket above the brake pedal.
press the button
Pull out on the headlight switch.
The Lamp - 2011 is rated/received certificates of: USA:TV-PG