where is fuel shut off switch for Ford Bronco eddy Bauer
On a 1996 Ford Bronco : The fuel pump inertia switch ( shut off switch ) is located in the front passenger footwell by ( or behind ) the kick panel * the kick panel is the interior trim panel , in front of the front door , beside the passengers right foot
The button is supposed to be down , if the button has popped up , the switch is tripped and no power is going to the electric fuel pump
On a 1996 Ford Bronco : I believe the fuel pump inertia switch ( shut off switch ) is located in the front passenger footwell , behind the kick panel * the kick panel is the interior trim panel , in front of the front door , beside the passengers right foot
On a 1996 Ford Bronco : The ELECTRIC fuel pump is INSIDE the fuel tank * it is installed through an access hole in the top of the tank
i hardwired my fuel pump so tada flip a switch and fuel pump is on
the switch you are looking for i beleave is the inertia switch.. on your bronco i beleave it is located behind the glove box
If it is the same as the ( 1996 ) Ford Bronco : ( Relay # 2 is the fuel pump relay )
it is under the hood in the fuse box between the air cleaner box an the master cylinder.
A 1976 Ford Bronco would still have a carburetor for the engine , so it does not have a fuel pump shut off switch ( inertia switch ) like the Ford fuel injected engines do ( that use an electric fuel pump ) * if that is what you mean
There is not a fuel shut off switch.
You might check the nutrae safety switch on your passenger side kick panel under your dash.Sometimes they can trip if you hit a bump or something to hard.I had it happen on my 90 model bronco
try replaceing the ingnition switch module located on the distruber(sp) l have an 89 that did the same thing
On a 1996 Ford Bronco : The 5.0 and 5.8 litre V8 engines from the factory are fuel injected , so there is no carburetor ( the 4.9 litre inline six cylinder engine was not offerred in the 1996 Ford Bronco model )
you have to drop the tank its mounted to the top
An inertia switch is a safety device that opens the electric circuit so that no power goes to the electric fuel pump if the vehicle is "jarred " enough If you have a bad enough collision or maybe hit a really bad pothole etc. The inertia switch can be manually reset
There is no fuel reset switch on a 1999 Camry that can be operated manually. There is an automatic reset switch located near the fuel pump. This is a relay switch. If the fuel pump is shut off, the relay switch might need to be replaced.
If it is the same as the ( 1996 ) Ford Bronco : In the Power Distribution Box ( which is " live " ) located in the engine compartment ( Relay # 2 is the fuel pump relay )
No, there is not.
under the dash,,drivers side
its located on the passager side of the truck under the dash
No, a 1996 Ram does not have an inertia switch.
General motors does not have a fuel shut off switch.