Wheris cut off switch on 1976 Ford bronco?


Top Answer
User Avatar
Wiki User
2014-01-11 11:56:56
2014-01-11 11:56:56

A 1976 Ford Bronco would still have a carburetor for the engine , so it does

not have a fuel pump shut off switch ( inertia switch ) like the Ford fuel

injected engines do ( that use an electric fuel pump )

* if that is what you mean


Related Questions

where is fuel shut off switch for Ford Bronco eddy Bauer

the switch you are looking for i beleave is the inertia switch.. on your bronco i beleave it is located behind the glove box

The 1993 Ford Bronco power door lock relay switch can be found behind the dashboard on the drivers side of the passenger compartment. The relay switch should be labeled as such.

Probably not because the Ford Bronco and Ford Bronco 2 were not very good by their motor.

No there isn't. The Ford Bronco and Ford Bronco II have not sold very well and The Ford Motor Company is not interested on making a Ford Bronco III because of this situation.

On the interior firewall to the left of the steering column

The 1988 Ford brake light switch does not adjust, replace it with a new one.

Ford Bronco was created in 1966.

On a 1996 Ford Bronco : I believe the fuel pump inertia switch ( shut off switch ) is located in the front passenger footwell , behind the kick panel * the kick panel is the interior trim panel , in front of the front door , beside the passengers right foot

its located on the passager side of the truck under the dash

to take the key switch out you need to press the little pin sized rod located on the bottom of the switch. once pushed in twist the switch out.

The Eddie Bauer was an option ordered from Ford. It was the top of the line Ford Bronco from 1987 to 1996

Look in the front passenger side kick panel.

We are replacing the ignition switch on a 1976 ford F150 Need some help - give us directions

The Bronco 2 was sold between 1984 and 1990. The Ford Bronco 2 was a compact SUV. It was smaller than a full-sized Bronco. It was succeeded by Ford Explorer.

( Yes ) do a Google search " 1993 Ford Bronco pictures "

Ford stopped making the Bronco with the 1996 model

There should be a button on the side of switch (behind dash) Depress this button pull on switch knob, entire rod should pull out of switch Unscrew bezel and switch is removed from back Ford suggests replacing wiring harness at the same time

it should be 3rd switch to the right all the way over underneath the steering wheel

well there was a recall on part of the switch o you might make sure that isn't the part

If you know where to put the key in, you know where the ignition switch is... Actually, safe to say you should stay away from it.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.