Under the throtle body on the face of the intake, there is either a 2 wire or 3 wire plug
The 4.3 temp sending unit for the gauge is located in the drivers side head between spark plugs 3 & 5.
where is the temp. sending unit located on a 1999 ford ranger xlt 6cyl 3.0l .Gauge does not work.
The temperature sensor (sends coolant temp to the PCM) is located in the top of the thermostat housing. The temperature sender (sends coolant temp to the gauge) is located in the bottom front of the same housing.
it is located on the driver side between cylinders one and three
Temperature Gauge Sending Unit The sending unit is located in the front section of the manifold in the vicinity of the thermostat.
it is located on the bottom end of the head
The temp sending unit for the temp gauge is located on the drivers side of the engine between cylinders 3 and 5 spark plugs.
temp sender located
Temperature Gauge Sending Unit The sending unit is located in the front section of the intake manifold in the vicinity of the thermostat.
the sending unit is located in the engine block, sends a signal to the temp guage, mind you the engine temp guage is not accuate, but at the 1/2 way mark is "normal" for the engine operating temperature
The coolant temp sensor screws into the thermostat housing. This is located where the top radiator hose connects to the engine.
Could be the temp sending unit located on the driver's side head, between the #1 and # 3 spark plug.