If i under stand corectly this is being asked about the valve to regulate the internal heat, The valve itself is located in the engine bay on the fire wall, slightly off to the passenger side.
Download the FREE Suzuki Samurai Shop Manual from http://www.suzukiinfo.com/ or visit zukikrawlers.com zn
Hot adjustment on the 1.3 engine is .009-.011 clearance on the Intakes, and .010-.012 clearance on the Exhaust valves
Valve Lash for a 1300 engine is: Cold Engine: Intake Valve: .013 - .017mm or .005 - .007 in Exhaust Valve: .016 - .020mm or .006 - .008 in Hot Engine: Intake Valve: .022 - .027mm or .009 - .011 in Exhaust Valve: .026 - .030mm or .010 - .012 in
My 1.3 liter samurai's (I think the same engine) used manual valve adjustments, not hydraulic. If that's the case, no, they would not autoadjust.
just did one take ur 4 bolts off the valve cover and u will see ur lifters and look closer there should be 10 bolts holding down the head
0.10mm
The EGR valve on a 1998 Suzuki Sidekick is not repairable. It has no replaceable or user serviceable pieces or parts.
kindly provide me the tappet clearance for Suzuki fa engine. thanks, lito
What is the valve clearence for a 1985 lt 125
The Sidekick 1.6 Liter 16 Valve conversion is by far the most popular. The 1.8 conversion could be done but they only used that engine for a couple of years. It is not a popular engine. I have the 1.6 conversion is a 1986 Suzuki Samurai. The major components are: Transmission adapter to connect to the Samurai transmission. Engine mounts from Sidekick Oil Pan and Oil Pick-up needs to be cut down unless the Samurai is raised to allow room for front axle. Computer and wiring from Sidekick must be installed into the Samurai. All of the engine controls, air filter, MAF, high pressure fuel pump. There is a speedometer conversion as well. It adds a magnetic (reed) relay to the speedometer and lets the computer know when the car is moving. -EVERYTHING- moves over from the donor vehicle including (most times) the third member gears because they are lower than a Samurai. Samurai=3.73 Sidekick (auto)=4.62 Sidekick (Man)= 5.12 All of these items can be purchased separately from several Suzuki aftermarket suppliers on the web.
The Suzuki swift 1.3 valve clearance is in two phases. The inlet is o.25mm, and the outlet or exhaust is about 0.29mm.
The EGR valve is located on the left hand side of the engine on a 2006 Suzuki Forenza. It is above the ignition coils.