A tee is located to the right hand side of the intake manifold, on top you should see the coolant system cap, its silver in color and is about 2-3 inches in diameter. This tee is the thermostat housing, it goes to your radiator and engine block, remove it from the block and you should see the thermostat. Remember when replacing the thermostat, the spring side goes into the block! 2.0L and 2.4L it is under where the upper rad hose hooks to the engine. 2.5L it is under where the lower rad hose hooks to the engine.
There are no reset switches on a Chrysler Cirrus.
The thermostat on your cirrus is located at the end of your lower radiator hose where it attaches to the engine.It has a three bolt mounting at the outlet.I am just getting ready to change mine.. ...
Chrysler Cirrus was created in 1995.
If it is a 2.5 it is located in the distributor housing.
in the wheel well on driver side
Under the hood, driver side.
The Chrysler Cirrus was only built from 1995-2000. The radiator cap is located on the housing where the upper radiator hose hooks to the engine.
I have a 95 Chrysler cirrus and my battery is located in the driver side wheel well. You have to take the wheel off and there is a comapartment leading to the battery
How do i remove the anti theft system on my 1995 Chrysler Cirrus?
Yes, it should.
under the glove box
95 Chrysler cirrus has a fuel shut off relay located under hood in box with other relay and fuses