answersLogoWhite
Thermostats
Chrysler Sebring

Where is the thermostat located on a 2002 Chrysler Sebring 2.7L?

141516

Top Answer
User Avatar
Wiki User
2006-01-28 23:55:08
2006-01-28 23:55:08

the thermostat left side front (looking at the engine)BEHIND THE ALTRNATOR. LOOK FOR THE BOTTOM RADIATOR HOSE AND FOLLOW IT TO THE END AND THERE YOU WILL FIND

1

Related Questions

User Avatar

It is under the housing where the lower radiator hose hooks to the engine.

User Avatar

A 2002 Chrysler Sebring sedan does not have a MAF sensor.

User Avatar

Are you sure you mean 2002 Chrysler Cirrus -- they quit making the Cirrus in 2000. It is now a Sebring

User Avatar

The thermostat is under the housing that the lower radiator hose hooks to on the engine.

User Avatar

A 2002 Chrysler Sebring was not built with a cabin filter.

User Avatar

No, in 2002 the Chrysler sedan was a Sebring.

User Avatar

A 2002 Chrysler Sebring convertible does not have a maf sensor.

User Avatar

It is under the housing where the upper radiator hose attaches to the engine.

User Avatar

It is behind the timing system, on the front of the crankshaft.

User Avatar

It is located under the passenger seat.

User Avatar

It is located in the body and engine computers.

User Avatar

If it on a 2.7 litre engine, it is not located in the normal or conventional manner as thermostats have been located in past vehicles. It is in the right front of the engine block, located in the thermostat housing under the alternator. Follow the lower radiator hose up to the engine. Where the hose terminates is the thermostat housing.

User Avatar

It is under the housing where the lower radiator hose hooks to the engine.

User Avatar

A 2002 Chrysler Sebring has an overhead cam engine. That means it does not have push rods.

User Avatar

The 2.7L out of a Chrysler Sebring or Dodge Stratus.The 2.7L out of a Chrysler Sebring or Dodge Stratus.

User Avatar

The 2002 Chrysler Sebring OBD 2 port is underneath instrument panel, near steering column

User Avatar

The high pressure AC switch on a 2002 Chrysler Sebring is located on the passenger side of the engine bay. It is paired with the low pressure hose and is mounted near the coolant and power steering reservoirs.

User Avatar

It is located on the bottom of the engine near the right front wheel. You will see the radiator hose connected to it. It is VERY difficult to change and I do not recommend you do it yourself.

User Avatar

is your car is a v6 2.7 it will be on the trans mission by the EGR

User Avatar

It is behind the rear seat. You have to remove the seat to access.

User Avatar

The convertable hydraulics are located behind the rear seat.

User Avatar

No. The body changed after 2000.No. The body changed after 2000.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.