4 cylinder : under upper radiator hose fitting on engine.
6 cylinder : under the housing that lower hose hooks to.
Are you sure you mean 2002 Chrysler Cirrus -- they quit making the Cirrus in 2000. It is now a Sebring
Remove the instrument bezel.
The Cirrus did not have the 2.7L. On the 2.7L it is under the housing where the lower radiator hose hooks to the engine.
You take the old one out and put a new one in.
In the thermostat housing on the engine. It is under the housing where the lower radiator hose hooks to the engine.
There are two, one on each side of the catalytic converter.
Chrysler Cirrus was created in 1995.
1-2-3-4-5-6
The thermostat on your cirrus is located at the end of your lower radiator hose where it attaches to the engine.It has a three bolt mounting at the outlet.I am just getting ready to change mine.. ...
To change the thermostat in a 2000 Chrysler Cirrus with a 2.4L engine, first ensure the engine is cool, then disconnect the negative battery cable. Drain the coolant from the radiator, and remove the upper radiator hose connected to the thermostat housing. Unbolt the thermostat housing, replace the old thermostat with a new one, ensure the gasket is in place, and reassemble all components. Finally, refill the coolant, reconnect the battery, and check for leaks.
the crankshaft sensort is at bottom under the distrbutor it is way down there by the trans housing.
Yes, it should.