If equipped, it is on the top of the transfer case and has four vacuum lines plugged into it.
On a Dodge truck, the vacuum switch is on the transfer case.On a Dodge truck, the vacuum switch is on the transfer case.
The vacuum actuator is on the right side of the axle. The electrical switch is on the actuator. The vacuum switch is on the top of the transfer case.
It is on the top of the transfer case.
on top of the transfer case. You should see 4 vacuum lines going to the top of the switch
The vacuum switch is on the top of the transfer case. The 4wd indicator switch is on the front axle shift actuator.
On a Dodge Ram, it runs from the intake manifold, to the switch on the transfer case, to the front axle shift actuator.
The vacume switch is located on top of the transfer case left side. Just pull the rubber plug on top and unscrew with a crescent or wrench and replace. Buy a pressure kit first and check to make sure the vacume is going into the switch and not comming out. Kit cost about 25 dollars. buy
Dodge didn't make a 1991 Durango.
Dodge does not have a reset switch.
Dodge does not use inertia switches.
Dodge does not use inertia/reset switches
Dodge doesn't use inertia switches.