0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Who makes the K-Car?
The "K" car is the short name for the car platform manufactured by Chrysler on which the Plymouth Reliant, Dodge Aries, Dodge 400, and Chrysler Lebaron were built.
What is a K car?
Built by Dodge. It's a mid size car built on the K platform. they are typically very square and boxy in appearance. Includes Dodge Aries, Chrysler LeBaron, Plymouth Reliant, Dodge 400.
Name a car that starts with K?
K-car by Dodge
Is an old Dodge worth it to rebuild and repaint?
It depends upon the year and model. If it is a vehicle that would be classified as a classic car, then it may definitely be worth the effort. If it just something like an Aries K-Car, then it probably isn't.
Where is the voltage regulator on 1988 Dodge Aries K?
It is part of the engine computer.It is part of the engine computer.
Where is fuel pump on 1988 Dodge Aries K?
The fuel pump is inside the gas tank. Had to replace mine and boy what a pain! Good Luck!
Where is the relay on 1981 dodge2.2l K-car?
The relay on a 1981 Dodge 2.2 L is located in the battery unit.
Where is the vacuum modulator on a 1989 Chevy k-1500 4wd 5.7?
The vacuum modulator on a 1989 Chevy K-1500 4wd 5.7 is underneath the transmission. It can be reached from under the car.
1984 Dodge A-413 transmission. Can the differential bearing be changed without pulling the transmission?
No. The access cover for the differential is only an inch or two forward of the K-frame/firewall in most applications. In order to replace the bearings, the differential carrier must be removed from the transmission; there is not enough clearance to do so with the transmission mounted to the engine, assuming you could even get the differential cover plate off. You will have to remove the transmission. The best way is to support the engine with a jack under the oil pan, unbolt the transmission, unbolt and mark the torque converter with respect to its position on the flywheel, and then lower the transmission out of the bottom of the car using an engine hoist. unless you drop the k frame, you will need to separate the lower ball joints, outer tie rod ends steering intermediate shaft and power steering hoses (if you only drop the frame down and don't completely remove it you wont need to touch the power steering hose) and the 4 bolts that hold the k frame to the unibody. anybody who has worked on a car before can probally do this. that should give lots of room to get at the diff.
What car model begins with the letter k?
Kia Kaiser K-Car
What is the name of a car named with the letter K?
Kitten is a car that starts with k
What year is k reg car?
a K Reg car will be made a 1992
