Slide in under the truck on the drivers side and look at the transmission tail shaft ( That is were the drive shaft slides into the transmission ) you will see an electronic device bolted into the side of the tail shaft. It will have a electric connector plugged into it.
The 1992 Chevy K 1500 speed sensor is located on the back of the transmission. The speed sensor will be in the upper right-hand corner of the transmission.
Speed sensor is on the back side of the transmission (passenger side).
It is sreewed into the transmission tail shaft housing.4X4 trucks have them in the transfur case tail shaft.
It is bolted in the drivers side of the transmission tail shaft housing. That is were the driveshat fits into the transmission. It is held in place with 1 bolt.
Look at the rear drivers side of the transmission and you will see a round electronic sensor that is held into the side of the transmission with 1 bolt and clamp. it will have a electric wire pluged into it. That is the speed sensor.
No, the rear section is different.
A 1999 Dodge Ram transmission does not have an input speed sensor.
There is no such thing as an oxygen speed sensor.
NV-3500
try the transmission ouput speed sensor
It is the two wire sensor on the lower rear driver side of the transmission.