Want this question answered?
If the Chrysler Sebring is a coupe, you can access the trunk through the back seats. You can also open the trunk by pressing the trunk release button, but the ignition must be turned on for it to work. Otherwise, you may need to call a locksmith.
You use the release button on the dash, or the keyless remote to open,
Try pressing the trunk release button with the ignition key turned on.
it's a yellow button inside the center console compartment.
Check for a valet switch in glove compartment, not sure if it should be "on" or "off" , I believe it should be "off". But switch it to see if that works.
Try the electric release button in the glove box.
You jump start the car from the jump start posts under the hood. You can then open the trunk with the button on the dash.You jump start the car from the jump start posts under the hood. You can then open the trunk with the button on the dash.
Look in line with the steering column on your left side just below the dashboard line you will see a round button. Press to open your trunk. You can also use your remote to pop open the trunk
It wasn't a standard feature but if you have one it's on the floor to the front left of the drivers seat.
There are 2 fuse boxes in these cars. One is in the trunk under the mat where the spare tire is and there is another under the hood. I believe the one your looking for will be in the trunk.
were do I find the button to open the trunk for my sud. car.
wrench size 10mm and if your battery died and you cant open the trunk, you have to enter the trunk through the back seat and pull the safety nop to the left. there is a positive anode under the hood on the passengers side the jump will give you enough juice for the trunk button to open the trunk.