0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the vacuum cut valve by pass code?
p1448
Vacuum Cut Valve Bypass Valve 2002 Nissan Senta GXE?
vacume by pass cut out valve nissan 1.8 sentra
2001 Nissan altima gxe were is the evap vacuum cut valve bypass valve?
evap vacuum cut valve bypass valve
How do you correct a code P1441 on a 1996 Nissan pickup?
This usually indicates a faulty Evaporative Emission (EVAP) Vacuum Cut Valve/Bypass Valve.1. Verify battery voltage to the EVAP vacuum cut valve bypass valve on the Black/White wire with the key ON.2. Verify the Green/White ground wire for the EVAP vacuum cut valve bypass valve is good all the way to the ECM. The Green/White wire goes to terminal 117 on the ECM.3. Verify the EVAP vacuum cut valve bypass valve is closed (can not blow through it by mouth) when the EVAP vacuum cut valve bypass valve is de-energized.4. Verify the EVAP vacuum cut valve bypass valve opens (can blow through it by mouth) with the valve powered up and grounded.5. Check the EVAP vacuum cut valve to verify it allows flow only one way.
Where is the vacuum cut valve on an 2003 altima?
dont no
Where is the vacuum cut valve located in a 1998 Nissan Altima?
it is located above and away from the egr canister under the driverside rear bumper it is round and hav about 3 hoses connected to it. if it is from a check engine light that says look at vacume cut valve check the egr canisters purge valve some times they stick and throw the wrong code
Where is the vacuum cut valve bypass valve on a 2002 Nissan Pathfiner where can you find a diagram for this part?
beside the spare tire on top of a plate
Where is the vacuum cut valve bypass valve on a 01 Nissan Xterra?
It is under rear in back of xterra under the spare tire next to evap can.
Where is the vacuum cut valve bypass valve on a 1999 Nissan Altima where can you find a diagram for this part?
This part is located behind the driver's rear wheel, just above and to the right of the evaporator canister if you email me at lupro1@aol.com and I will send you drawings and photo of the part.
What does the dtc error code 1490 mean 2000 Nissan xterra?
Troublecode P1490 means: EVAP Vacuum Cut Valve Bypass Valve Circuit Malfunction
Where is the vacuum cut valve bypass valve on the 2000 Nissan Sentra?
If it is like my 2001 Nissan Sentra, there is a cover behind the drivers side tire. It bolts on in the front and 2 quills click into the charcoal cannister. The cover comes off and the white plastic piece is the vacuum cut valve bypass valve. Nissan price $140.00-Wilton Nissan. I also did as recommended, and replaced the valve on the cannister, and the solenoid -the bolt on the canister broke as is evidently common. Replace cannister. Whole job (I did the labor) about $600.00
Where is the Vacuum Cut Valve Bypass Valve on a 2001 Nissan Sentra?
Behind the drivers side rear wheel. It has a black vented black cover over it. It is white plastic and costs about $125.00 at Nissan.
