0
remove air filter and you will see it
It may actually be UNDER the air filter box, which will require removing the whole air box assembly.
That's where it is on a 1999 Lumina.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Where can you get the grommet for the T connector that comes after the PVC valve on a 1995 Lumina?
Dealership
Where is the fan motor temperature sensor on a 1995 Chevy lumina 3.8 liter?
on the right of your PC valve Where is the PC valve?
Does a 1995 Chevrolet Lumina 3.1 V6 Sedan use the old Freon or the new R-134 refrg?
134
What type of freon does a 1995 Chevrolet Lumina use?
It will be on the compressor also the quantity needed to fill it if it is completely empty. It is 134.
Where is the Singal Flasher located on a 1995 Chevy Lumina?
I have a 92 lumina 3.4 Mine was above the brake peddle
Where is the expansion valve located on a 1995 Pontiac grand am?
where is the expansion valve located
Where is the PCV valve located on a 1995 Isuzu Rodeo?
where is the pcv valve located on a 1995 Isuzu rodeo v6 3.2l
Where is the egr valve located on a 1995 dodge ram 1500 v8?
Where is the EGR valve located on a 1995 dodge 1500 5.2 liter
Where is the egr valve located on a 1995 Hyundai Elantra?
The 1995 Hyundai Elantra EGR valve is located on the firewall in the engine compartment. The EGR valve will be on the passenger side of the firewall.
Where is the low pressure AC valve for charging a 1995 Camry AC unit located?
The Freon low pressure port is located on the passenger side of the engine near the back. It is made into an aluminum pipe connected to the ac hoses.
Where is the PCV valve located on a 1995 Chevy Lumina 3.4?
The PCV Valve on a 1995 Chevy Lumina 3.4L is located in the line that comes off the rear intake manifold between the throttle body & the intake. This line is on the back side of the throttle body and intake manifold where the two come together and make a "L" shape. The middle of the "L" shape has a approx. 1/2" rubber line that comes out and is held in place by a sqweeze tight mettle clamp. If you follow that line for aprox. 6" you will come to the PCV Valve. Mine was covered with another 1" hose over the top of it, so you will need to remove that carefully. The bottom of the PCV Valve is a plastic line. You do not need a L shape PCV valve, my 3.4L lumina needed a straight PCV Valve. it only took me 4 hours to find it :(
Where is the emergency shut off switch for the fuel pump of a 1995 Chevy lumina?
It is located wherever you installed it when you did the safety modifications to prepare your Lumina for racing.
