Follow the top radiator hose back to the engine. You'll see a housing that's held in place with two bolts... that's the thermostat housing.
The thermostat on a Chevy 350 is under the housing at the engine end of the upper radiator hose.The thermostat on a Chevy 350 is under the housing at the engine end of the upper radiator hose.
There's two temps sensors, one is next to the thermostate housing, and the second in between the left manifolds on the side of the engine.
If you follow the lower radiator hose to the left front side of the engine you will see where it clamps onto a housing on the water pump, It is behind that housing. Remove the 3 bolts that hold the housing on and it will be there.
In the thermostat housing at the front of the intake manifold.
No. The 235 had a totally different bolt pattern.
it is threaded into the thermostate housing.
You can buy a bell housing that mates anything to anything.
That is a body to engine ground wire.
Late month of 1999.
if a 4.3 yes... if is a 2.2 need 4.3 bell housing
Should be 6 bolts on the bell housing to mate it to the engine.
if it is a 3ltr diesel follow the top hose to the engine and that the housing for the thermostate