if you look on the transmission, you should see two wires connected to the neutral switch.
The autos do not have a safety switch....They have a sensor located in the trans itself that tells the ecu if its in neutral/park.....I believe its a 3 pin plug going into the trans itself,.....trace it and see where it leads.....You may be able to hook up a toggle switch..
I found the correct gap setting for the 1994 Mazda B4000 to be .054. As found at the auto parts store and Advanced Auto.
Auto or stick?
the neutral safty switch is located in the trans range switch if you have an aw4 auto trans replace or clean and reinstall the switch
Idling in neutral.
Manual or auto tranny?
Mounted somewhere on the shifter.
I am about to find and change one on a 1992, I think the process should be similar.....I will post the results ASAP..If I am successful!!!!!!!!!!!!!!
change the neutral safety switch.
The 1994 Jeep Wrangler that will not start and is having the auto shutdown relay clicking, is having a problem with the auto shutdown relay switch. The switch needs to be replaced because this is what is stopping the vehicle from starting.
the inhibitor switch only allows the car to be started in Neutral or Park. No other positions.
It is a Radiator Fan Switch - You can purchase it at Advanced Auto for about $35 but they have to order it It is a Radiator Fan Switch - You can purchase it at Advanced Auto for about $35 but they have to order it It is a Radiator Fan Switch - You can purchase it at Advanced Auto for about $35 but they have to order it