On the drivers side near the bell housing is cast with the model number. It is fairly large. Just above that, near the head, is the serial number. It will be 7 digits. On the passenger side, the block casting number is visible just aft of the injection pump. It will be 5 digits.
On the side of the engine block on bottom of the motor
On the front left of the block is where the number is located along with a two letter code that tells you what the motor is.
answer try above the starter motor on block of engine
It is located at the backside of the motor block. You will need to a mirror to see it less to remove the engine.
It is located in the engine block on the front of the motor. Its to the right of the oil sender and under the forward motor mount.
Lower left side of engine block.
The engine oil pump is located INSIDE the engine oil pan , bolted to the bottom of the engine block
what does the casting number GM 3892657 say about this engine block
on the 01 zetec motor it is located below the alt. on the engine block.
The best way to identify your motor is to use the casting numbers on the drivers side rear of the block, behind the cylender head. The cylender head casting numbers may help too, they are located under the valve cover.
where is the engine number located on the 5.6L GMC engine.
That is not an engine block # That # is the fireing order on a Chevy engine. You must have gotten that # off of the intake manifold. Sorry we can't help you.