0
What else can I help you with?
What are the timing marks on a fiat punto active sport 2003?
The timing mark on a Fiat Punto Active Sport 2003 is through the hole of the bell housing. The bell housing is under the area of the battery of the vehicle.
Where is the timing hole on polaris sportsman?
On the stator cover on the right side of the engine. Their will be a 9/16" bolt at the top of the housing, which is your timing hole.
Why is antifreeze leaking out of the bell housing bolt hole?
Not knowing what year, make, model and engine you have I can only guess that you may have a rotted out welsh plug on the back of the engine block.
Where is the bleeder screw located on the clutch system on the bell housing for a 1991 Nissan pickup?
on the slave cylindar rite next to the hole in the bell housing
What are the timing marks on a fiat punto 1995?
Hi The cam has a mark on the pulley that faces the back of the in the 9 o clock position and crankshaft can be aligned via inspection hole in the bell housing (gearbox) mark on flywheel needs to align with the mark closest front of engine thanks Alan
Why would water leak from the small hole on the bottom of the transmission bell housing?
Driving through a large amount of water might trap some of the water in the bell housing and cause it to drip out later. There are also freeze plugs in the back of the engine block that may be leaking. Is it water or coolant.
How do you fix a hole in the bell-housing of a 1999 Buick Lesabre and does itneed to be tended to ASAP?
If the hole is no bigger than a few inches around, i would just find a way to seal it off so nothing can get inside the bell housing. If the hole is very big it can cause stress cracks.
Where is the weep hole location on a 2001 Chrysler Sebring 2.7 engine?
The water pump weep hole is located next to the thermostat housing. The thermostat housing is the part the lower radiator hose attaches to on the engine.The water pump weep hole is located next to the thermostat housing. The thermostat housing is the part the lower radiator hose attaches to on the engine.
Where is the weep hole on a 2.7 liter water pump on a 2002 Concorde?
The weep hole is next to the thermostat housing, which is where the lower radiator hose hooks to the engine.The weep hole is next to the thermostat housing, which is where the lower radiator hose hooks to the engine.
What causes a rear oil seal to leak on a new diesel engine you have replaced three times but still leaks a small amount from the bottom of the bell housing key hole area?
Sounds like your drive is not properly aligned with your engine.
How to adjustment clutch on Semi?
rotate engine until adjuster is on the bottom through the hole on the bottom of the bell housing,wedge something between the seat and clutch pedal it has to be pushed down to turn the adjuster
Where is the weep hole on a 2002 Chrysler Sebring 2.7L engine water pump?
If you follow the lower radiator hose to the engine, you will find a plastic housing behind the alternator. The water pump weep hole is next to the lower bolt for that housing. By the way that housing is where the thermostat is located.
