I scanned mine, but it's probably copyrighted so may not be postable on this site.
Need owners manual for multi meter model 82022
Yes. The meter is the property of BC Hydro and not the homeowner. The meter Housing is the home owners but not the meter.
The scale of each meter manufacturer will be different. You'll need to refer to the owners manual to determine the proper setting. Remember that an ammeter is used INLINE with the electrical device to determine current draw. Do NOT put the test leads of an ammeter across the two leads of the service voltage.
look in the owners manual. However just push the "Info" butom until it gets to trip, then push and hold the little stem byt the information center until it goes to "0"
I do have a Micronta 22-210 instructional manual. If you are still interested let me know.
Page 425 owners manual.set trip meter to A,turn off ignition,while holding trip meter turn on ignition,wait for 00000 on trip meter, done.
Read the owners manual in the glove box. It will have in the index the light you are talking about. Or find the picture of the dash components in the owners manual and read its description and go from there. It's the trip meter reset sticking out of the spedo lens. Turn the engine off with the odometer reading[mileage] showing. Turn the ignition switch to the "run" position. Hold the trip meter reset "button" down for five seconds or more. When you see 0000000000 showing,release the button. Odometer reading should appear and light will be out. I have to do it once a year since we only drive about 7500 miles a year.
According to the manual it means that you have a calibration or test strip error. You should try re-calibrating, and checking the date on the test strips. The manual also suggests checking the date in the meter. If the meter has been calibrated to the box of strips, and the strips are not expired, you should call customer service for more assistance.
Your Owners manual should tell you how to reset it. On my GM with the key in the on position (Engine not running) I push my trip meter button till it displays OIL LIFE the hold it till I here it beep then your done. Hope This Helps.
From the meter to the house is the owners responsibility. The meter and the line to the street is the water utilities.
Your Owners manual should tell you how to reset it. On my GM with the key in the on position (Engine not running) I push my trip meter button (three times) till it displays OIL LIFE the hold it till I here it beep then your done. Hope This Helps.
in a haynes repair manual, the back section is about chassis electricalthis is where you will find it.or in a ford shop manual