Want this question answered?
Because to actuate the brake you pull at the brake lever.
Because the e brake is hooked into your braking system and that system has a problem.
your brake system is a good one because you have to push the brake to disengage it, as if it was on a spring.
Because your brake system is not working properly. You need to have your brake system checked out and repaired before you have to make an emergency stop and then they fail to brake as they should. ALWAYS DRIVE SAFELY
it may be because there is another problem in the brake system
It is on because there is a problem with the Antilock Brake System (ABS).
The integral brake is a parking brake that is on the inside of a disk brake system . This system use cables to engage the parking brake just the same a drum brake system.
The brake light switch is either bad or needs adjusting.Answerjust because the car stops doesn't mean your brake system is working perfectly, check the brake fluid reservoir and if it is low you might want to have the system checked.
A brake system brakes.
The check engine light is on because the ECU has detected a problem with the emissions system. The brake light can be on because there is a problem with the brake system. Can be as simple as the parking brake has not been fully released or the master cylinder is low of brake fluid. Have the ECU scanned with an OBD2 scan tool which will retrieve the code that has been set. This code will tell you what part of the emissions system is being effected.
The service brake is the one which applies the brakes - the emergency brake system is the system which releases the spring brakes.
Brake system usually has the following components: 1) brake pedal 2) brake fluid tank 3) brake system hoses 4) calipers 5) rotors 6) pads p.s. If it's a drum brake system - brake drums replace calipers and rotors.