its behind the motor, on top of the bell housing, behind the distributor, should have two bolts, very very hard to see, you will need a mirror and a flashlight. good luck
where is the crankshaft sensor on a 1994 dodge pickup with a 5.9l engine?
The crankshaft position sensor on a 1998 3.0 dodge caravan is located on the top of the bellhousing towards the firewall.
Driver side of the bellhousing.
Front of engine, reads off a a tone wheel behind the crankshaft pulley.
it's on the right front of the engine, not far from the crankshaft sensor
The crankshaft position sensor is located on the rear of the engine, on the driver's side just below the distributor.
The Crank sensor is located on the transmission housing near the top at the back of the engine.
It is located on the rear of the engine, just above the oil pan. It has a three wire sensor.
a 1993 doesn't have a cam sensor. the crankshaft position sensor is located on the front of the engine directly above the crankshaft pulley
The crankshaft sensor on a 2006 Dodge Stratus is located on the bottom of the engine near the oil filter. It tells the vehicle's computer where the crankshaft is located at any given moment. On the v6 it is on the top of the bell housing.
The crankshaft position sensor on a Dodge 5.9L V8 is located behind the passenger side cylinder head, and it aims at the flywheel through a hole in the bell housing.
The crankshaft position sensor is located at the lower left hand side of the crankshaft pulley. The crankshaft pulley is the large pulley located in the center lower portion of the front of the engine.