Home Theater

Which Yamaha receiver is best for satellite radio you do not need surround sound?

123

Top Answer
User Avatar
Wiki User
Answered
2012-03-02 07:42:47
2012-03-02 07:42:47

The Yamaha R-S700 is their best stereo receiver with Sirius satellite capability. It is not a surround receiver.

001
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Related Questions


One can purchase an inexpensive satellite radio receiver from any outlet store that sells electronics and appliances as well as online at websites that sell satellite radio receivers.


Audiovox Xpress RC Satellite Radio Receiver is the best satellite radio receiver and you can pick it up for as low as $119.98. With Audiovox Xpress RC Satellite Radio Receiver you can pause and replay up to 60 minutes of your favorite XM programming and save up to 10 songs to listen to later on.


You cannot convert a standard radio to receive the satellite radio signal. You will have to purchase a Sirius satellite receiver.


The fuses on a Yamaha R9 receiver is easy to find. The fuses are located inside the radio on the left hand side connected to the wall. You will have to take the radio apart to get to the fuses.


Satellite radio requires a special receiver to receive the signal from the satellite. If you do not already have a satellite radio you may be able to install one with your installed radio if you have a open auxiliary jack, otherwise you will likely need to replace your radio.


I think it means you can buy a satellite radio receiver, and your stereo will accept it's input without modification.


A pioneer receiver is an electronic device that can be used to view TV and Radio Stations. It is like a satellite receiver. I presume that Pioneer is just a brand.


Satellite radio works on a pay model.Without a subscription you can't receive the programming.


No. It's just a radio receiver, listening for satellite signals.


A satellite communication simply bounces a radio or data wave to another satellite or a receiver on earth. Satellites all act as giant relays for data transmissions.


You can use any sound card that has surround sound outputs along with a surround speaker setup to watch movies in surround sound. No sound card replicates all the functions of an actual receiver, though, as a real receiver will connect your CD player, TV, DVD player and other devices and offer a AM/FM tuner for radio (that's the 'receiver' part of the description).


there is a satellite radio that i guess only mervyn's can use. i work at a mervyn's and saw a receiver.


A receiver is one component. It is composed of a power amplifier, radio tuner (usually), surround sound decoders, and audio and video switchers (and possibly scalers).


Once you buy an HD receiver then you will get HD radio for free but your stations have to have the feature to get the quality. You pay for Satellite Radio but you get a ton more stations and can pick and choose to listen to any within your package. HD is only for regular local radio stations that have an HD antenna. Both boast great sound quality which is true� they are way better that a normal radio station but still short of CD quality. If better sound if what you want then buy an HD receiver� if better sound and more options is what you want then buy a subscription to satellite radio.


In order to pick up Sirius radio stations you will need to have a Sirius radio satellite receiver. If your current car radio does not have a auxiliary jack to plug the receiver into you may also need to get a new head unit for you cars audio system.



The best brand of satellite radio is Sirius due to the static-free great reception, simple installations, and fair prices. Some of the products from this brand are SiriusConnect Home Kit, Sirius XM Radio Tuner, and Sirius Stratus 5 Receiver.


Very easily. The GPS receiver measures how long it takes a certain radio signal to travel from the GPS satellite(s) to itself, and from that, the receiver calculates the distance. It can do that because it knows precisely how fast the radio signal travels.If you have signals from at least 3 satellites, the process of trilateration (not triangulation) pinpoints the location where the 3 distances 'cross' each other. If you have 4 satellites 'locked in', then you will find out your altitude, too. (The process is not quite this simple, but to go on would be confusing.)The hard part is measuring the precise time it takes for a certain radio signal to travel from the GPS satellite to your GPS receiver. Well, hard if you do it, but very easy when the GPS receiver does it!First, each GPS satellite carries an on-board atomic clock. This clock is outrageously accurate, but even so, ground stations connected to the US Navy atomic clock system keep each satellite precisely at the correct time. Your GPS receiver has an on-board high-precision clock of its own.Second, when your GPS receiver first makes contact with the constellation of GPS satellites, it is sent an 'almanac' that lists where each satellite is, what it's precise time is, and other goodies. After reading the almanac, the GPS receiver sets itself to the precisely same time as the satellite constellation.Thirdly, when the GPS receiver gets a signal from the satellites, there is information in it that says precisely at what time the radio signal left each satellite, which is identical for all the satellites. Then your GPS receiver 'looks at its watch' and subtracts the 'sent' time from the 'received' time. The data in the almanac are updated by the satellite constellation every few hours so that your GPS receiver will always know where the satellites are and what their precise time is.Go back to the beginning and reread what your GPS receiver can do once it knows the precise travel time of the radio signal.


One of the main differences between satellite radio and FM radio is that there is a cost for satellite and FM is free. Satellite radio also does not operate using the same numerical AM and FM channels as FM radio.


You have to install a satellite radio (keep your car radio too). Or, if you have one already installed, that's good. P.S. You have to pay for satellite radio.


The defensive end is not supposed to interfere with the receiver. The metal siding on that truck might interfere with our satellite radio reception.



Very easily. The GPS receiver measures how long it takes a certain radio signal to travel from the GPS satellite(s) to itself, and from that, the receiver calculates the distance. It can do that because it knows precisely how fast the radio signal travels.If you have signals from at least 3 satellites, the process of trilateration (not triangulation) pinpoints the location where the 3 distances 'cross' each other. If you have 4 satellites 'locked in', then you will find out your altitude, too. (The process is not quite this simple, but to go on would be confusing.)The hard part is measuring the precise time it takes for a certain radio signal to travel from the GPS satellite to your GPS receiver. Well, hard if you do it, but very easy when the GPS receiver does it!First, each GPS satellite carries an on-board atomic clock. This clock is outrageously accurate, but even so, ground stations connected to the US Navy atomic clock system keep each satellite precisely at the correct time. Your GPS receiver has an on-board high-precision clock of its own.Second, when your GPS receiver first makes contact with the constellation of GPS satellites, it is sent an 'almanac' that lists where each satellite is, what it's precise time is, and other goodies. After reading the almanac, the GPS receiver sets itself to the precisely same time as the satellite constellation.Thirdly, when the GPS receiver gets a signal from the satellites, there is information in it that says precisely at what time the radio signal left each satellite, which is identical for all the satellites. Then your GPS receiver 'looks at its watch' and subtracts the 'sent' time from the 'received' time. The data in the almanac are updated by the satellite constellation every few hours so that your GPS receiver will always know where the satellites are and what their precise time is.Go back to the beginning and reread what your GPS receiver can do once it knows the precise travel time of the radio signal.


A broadcast receiver is a radio that receives broadcasts from commercial radio stations.


XM Satellite Radio was created in 1992.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.