Want this question answered?
where is the blend door machanism (acuator) located in my 1998 toyota camryalso how to fix
Bad "blend door" actuator or stuck blend door on the driver's side.
need to know were the blend door actuator is for a 2002 gmc yukon on the drivers side , dual climate controls, rear air and heat
The blend door actuator's function is to blend the outside air/heat or outside air/ air cond to get the desired temperature out of the unit. It also switches between heat and air conditioning modes.
On the HVAC box behind the dash assembly. Unfortunately, the dash has to be removed to gain access to it.
Check the blend door under the dash on the F150. Check the vacuum system as well. The vacuum controls the blend door and controls the heat as well as air from the defrost.
behind clove box it is inclosed in the black air duct system there is an acuater that controls opening and closing of the door the blend door controls hot air and cold air flow
The blend door for a 2000 Neon is located behind the dash. The blend door controls the air flow for heat and ac.
This sounds like a Blend Door problem. The problem is that the blend door in the plenum is stuck in the A/C position and will not reposition to allow heat. There are two possible issues. 1: The Acuator has snapped off (plastic breaks) 2: The Blend Door is broken (plastic hinge broke) There are related articles to fix both of these conditions
That's controlled by the blend door, not by a fuse.
There is actually 3 blend doors on the plenum. The blend door actuator is on the top of the case. It controls heat and cold air.
The blend door controls how warm or cold the outlet air is.