0
On an s-cam air brake, it's the slack adjuster. The brake valve could also be considered one.
Wiki User
∙ 7y ago
Add your answer:
Earn +20 pts
Why is a bicycle brake a good example of a lever system?
Because to actuate the brake you pull at the brake lever.
Why is the bicycle brake system a good example of a lever system?
Because bicycle brakes use levers. There's one lever at the handlebar, and for all but hydraulic brakes either the brake itself consists of levers or a lever is used to make the brake pads engage.
What is a parking brake system?
Generally a parking brake system would be the parking brake lever (either a hand activated lever with a ratcheting lock and release lever, or a foot brake pedal with a ratcheting mechanism that releases when pushed to its maximum.), cables continuing from the parking brake lever to the rear drums, and the parts inside of the standard rear drum brake that are activated by pulling the cables. This system is used to prevent a car from moving when parked on an incline, or to prevent the transmission from jamming in Park which can happen when towing a load or parking a heavy vehicle on a hill.
Is the emergency brake a hydraulic system that is automatically actuated when the driver depresses the brake pedal?
No, the regular brake system is a hydraulic system that is actuated when the driver depresses the brake pedal. The emergency brake is a direct mechanical system that is manually actuated when the driver pulls the hand lever or depresses the emergency brake pedal, which is separate from the brake pedal.
What are the components of the lever?
I THINK THE 3 components of a lever is:1st class2nd class3rd class
Is the brake of a bicycle a type of lever?
What the brake lever does is that it use the action of the rider pulling on the lever into a force that can be used to slow the wheel(s) down by generating friction.
How do you remove parking brake lever from a shoe on Cavalier?
You can remove the parking brake lever, from the brake shoe on your Chevrolet Cavalier, by removing the retaining clip. The retaining clip connects the brake lever cable to the brake shoe.
Which of the following statements about a typical hydraulic brake system true?
A hydraulic brake pedal acts as a lever to multiply force
Where is the Brake switch on 66 ford located?
The brake light switch will be located somewhere on the brake pedal lever or at the place where the lever connects to the dash brace.
How do you release the parking brake on a 1966 Thunderbird?
A small release lever just in front of the parking brake foot lever
What are the components of a slot machine?
a lever
How to release an emergency brake on an 1993 S10 if the cable is snapped at the lever?
There should be a lever down by the brake pedal. it will look kind of like a gear with a tab on it. that lever releases the parking brake. just be careful not to let the parking brake pedal smack you in the face....
