netstat-m
You can check what devices are connected in Device manager in windows.
Devices on a linear bus network are connected to each other via a wire, usually through a T-connector device. In effect, the devices are "daisy chained" together without any other device connecting them.
No. What purpose does a mouse serve with nothing to process its clicks? What good does a monitor do with no computer to send it information? Input and output devices are peripheral devices and need to be connected to the processor to serve a purpose.
wireless conectivity is t6hings like bluetooth things that can connect with other devices without wires connected
To check your internet gateways and lookup all access points you are connected to you should click your start button and open a command prompt. Inside the command prompt type "ipconfig/all" without quotes and press enter. All IPs will then be displayed on the screen.
Clock rate.
There sometimes are "Wake on LAN" parameters that can be set in BIOS which will boot a connected computer if the LAN card receives a command.
In order for you to have internet, the router should be connected to a cable modem or another switch or wireless router which already have internet access.
Command and Conquer does have graphics.
All three wires, the "hot", neutral and the ground must all maintain the integrity of the circuit. This is why pigtails are connected from the main circuitry to the receptacle or switch devices so that they can be removed without opening the electrical circuit.
SETCH command is used to point the command its head in any direction without using the RT or LT.
No, the Samsung Gear devices only work on the Samsung Galaxy line of phones (Galaxy S III and above), and rely on being connected to that phone for notifications and the like.