Depends on the standard being used, but it will either be an:
RJ11 or RJ45 connection jack.
Lan Card provides a port for a network cable to connect the pc to a network.. LAN : Local area network or Ethernet Card and Network Card
It's called a Network Interface Card, or "NIC" for short.
Some are a straight through network cable, some are crossover.
I think it uses BNC connectors.
It is a network interface card. The purpose of this card is that it allows your computer to connect to the internet with the use of the ethernet cable.
An ethernet adapter is the component that allows you to connect to your internet modem or computer network. Upon connecting your ethernet cable, you will be able to access the internet or computer network to which you are connected.
None. You need a network card and cable to connect them. The cable is called CAT 5.
You connect each computer to a switch, using a UTP cable. Some small switches only have 8 ports; you can connect two such switches to each other, with an additional cable. Each computer has to have a network card.You connect each computer to a switch, using a UTP cable. Some small switches only have 8 ports; you can connect two such switches to each other, with an additional cable. Each computer has to have a network card.You connect each computer to a switch, using a UTP cable. Some small switches only have 8 ports; you can connect two such switches to each other, with an additional cable. Each computer has to have a network card.You connect each computer to a switch, using a UTP cable. Some small switches only have 8 ports; you can connect two such switches to each other, with an additional cable. Each computer has to have a network card.
A network interface card is used to connect a computer to an Ethernet network
Subscribe to an ISP for internet such as IVC Telecom and then connect your laptop to the modem with an ethernet cable or connect wirelessly using wifi, assuming your laptop has a wireless network card.
A network card, or network adapter as it is sometimes called, allows a computer to connect to a network of other computers. These devices will usually have both a physical layer and a data link layer. Ethernet devices will most often have an 8P8C socket where the network cable can be connected.
1) You purchase the cable 2) You plug it into the network adapter (network card). If the cable directly connects two computers, you need a crossover cable; if the computers are connected via a switch (this lets you connect more than two computers), you need a straight cable. Make sure to measure how much cable you need, and to purchase some extra length, to let you move the computers around freely.