Want this question answered?
chrome
For outdoors use (autos, decorative work), direct chromium plating over steel may suffer imperfections which will lead to failure. A better technique is to copper plate the item first, then a coat of nickel, then chrome. The copper binds best to the steel substrate, the nickel gives a good impervious coating, then the chrome for a high mirror finish.
Chrome is used with iron to create stainless steel alloys.
Usually made from Chrome plated brass
Chrome won't rust. That's why it's plated over steel. But any tiny crack or flaw in the chrome plating can allow rust to penetrate the "skin" of chrome and attack the metal beneath. As the chrome barrier is compromised, the rust continues to spread. More and more steel is attacked and breaks down. Stainless steel is (usually) designed so the steel (iron with a bit of carbon) is alloyed with a small percentage of chromium in it. This chromium is what makes the stainless steel resistant to attack. Stainless steel resists attack by rust "all the time" while chrome plated steel resists attack by rust only until any flaw or crack appears or is created. It is then vulnerable to attack. A scratch on stainless steel, while unsightly, is not going to open a path for attack by rust. Note: Rust doesn't "attack" steel. It forms as the metal is chemically attacked. The oxidized iron that appears after the chemical attack is the rust.
stainless is better.
Stainless steel contain iron (as base) and nickel, chrome, vanadium, etc.
Stainless steel
Her Batesville "Millenium" casket was made of chrome / nickel stainless steel.
Its your own opion.
Chrome, Brass, Stainless Steel, Galvanized (old pipes), Copper & Nickel.
Along with chrome, polished brass is the most popular. Other finishes available are stainless steel, satin and brushed nickel.
The Satin Nickel finish is nickel plating on brass that has been lacquer coated and made to appear dull. Satin Nickel is sometimes referred to as brushed nickel. It is similar in appearance to brushed stainless. Brushed implies the parts has been "Wire Brushed" and directional lines of abrasion can be seen. Satin Nickel is electro-deposited on the part from a Nickel salt solution usually Nickel Sulfamate. The electro-deposit is "Satin" or "Velvety" in appearance and shows no marks or lines from abrasion. Satin and brushed are the same finish. Satin and brushed are the same finish.
Stainless steel should be a better option for serving trays. There is no set rule unless there is a specific purpose though.
By adding other metals like chrome and nickel to the mix. the resulting alloy is the strongly corrosion resistant.
Did the germans nickel or chrome plate luger models?
Chrome is more durable and cheaper than stainless steel.