Not simple to say as it depends on what you mean by recycle and easier. Cost will also be affected by the value of the product produced during recycling - the profit/margin to be gained. Many plastics do not get re-used in a way that makes full use of their properties - they get "down-graded". This is inevitable for many plastics as what appears to be one polymer - pp for instance - is not - it is a whole family of polymers that differ significantly in how they must be processed if they are to be used to take maximum advantage of their properties. Also, for some uses, some polymers are not recycled as is, they may be modified or even broken back down to their monomers before they can be recycled - PETP is an example. Yet another hassle is contaminants, which will vary enormously. Some will be contaminants from use - like dust and debris etc etc , some will be intended contaminants, like inks and other coatings. All of these affect "recyclability" enormously.
Some plastic used are PET (polyethelene teraphthalate), HDPE (high-definition polyethelene), LDPE (low-definition polythelene), PP (propolene), and sometimes the controversial BPA (bisphenal- A).
If you think to recycling codes: - 01 is for polyethylene terephtalate (PET) - 02 is for high density polyethylene (HDPE) - 03 is for polyvinyl chloride (PVC) - 04 is for low density polyethylene (LDPE) - 05is for polypropylene (PP)
Any plastic is recyclable. The issue is whether or not there is a market form the eaiest products to form, or whether it is not "short-term cheaper" to just draw more crude oil into making new plastic.
There are many type of plastic available for food boxes, below mentioned is the list of Polyethylene terephthalate (PET or PETE) - GOOD to use High density polyethylene (HDPE) - GOOD to use Polyvinyl chloride (V or PVC) - BAD Low-density polyethylene (LDPE) - OK Polypropylene (PP) - OK Polystyrene (PS) - BAD Other (usually polycarbonate) - BAD For detailed help you can talk to TheCustomBoxes and find the detailed answer.
Yes, plastic is a solid. Various melting points of different types of plastic:The melting point of HDPE (High Density Polyethelyne) is about 130 ºCThe melting point of LDPE (Low Density Polyethelyne) is about 110 ºCThe melting point of PET (Polyethylene terphthalate) is about 250-260 ºCThe melting point of PP (Polypropylene) is about 160-170 ºCThe melting point of PS (Polystyrene) is about 70-115 ºCThe melting point of PVC (Polyvinyl Chloride) is about 75-90 ºC
Some plastic used are PET (polyethelene teraphthalate), HDPE (high-definition polyethelene), LDPE (low-definition polythelene), PP (propolene), and sometimes the controversial BPA (bisphenal- A).
If you think to recycling codes: - 01 is for polyethylene terephtalate (PET) - 02 is for high density polyethylene (HDPE) - 03 is for polyvinyl chloride (PVC) - 04 is for low density polyethylene (LDPE) - 05is for polypropylene (PP)
I barely know.
It refers to the type of plastic. 1 = polyethylene terephthalate (PET or PETE) 2 = high density polyethylene (HDPE) 3 = polyvinyl chloride (PVC) 4 = low density polyethylene (LDPE) 5 = polypropylene (PP) 6 = polystyrene (PS) 7 = Other
Any plastic is recyclable. The issue is whether or not there is a market form the eaiest products to form, or whether it is not "short-term cheaper" to just draw more crude oil into making new plastic.
Safer plastic containers are polyethylene#2 and #4 (High density HDPE #2 and Low density LDPE #4). HDPE is used for milk, water, juice, and yogurt containers. LDPE is used for squeezable bottles (honey, mustard, etc.).Relatively safe#1 polyethylene terephalate (PET) used only once#2 and #4 polyethyleneUnsafe# 5 polypropylene (catsup bottles, yogurt containers)#6 polystyrene (Styrofoam)#7 polycarbonate (Nalgene) water bottlesNever useFood or drinks heated in plastic containers in a microwave.Styrofoam cups (polystyrene #6), especially for hot liquids.#7 polycarbonate (Nalgene) water bottlesPlastic baby bottles. If you must use bottles, use only glass baby bottles with silicone, not latex, nipples.Do not reuse plastic water bottles, & don't forget to have children wash their hands after using the bathroom.
There are many type of plastic available for food boxes, below mentioned is the list of Polyethylene terephthalate (PET or PETE) - GOOD to use High density polyethylene (HDPE) - GOOD to use Polyvinyl chloride (V or PVC) - BAD Low-density polyethylene (LDPE) - OK Polypropylene (PP) - OK Polystyrene (PS) - BAD Other (usually polycarbonate) - BAD For detailed help you can talk to TheCustomBoxes and find the detailed answer.
Generally detergent bottle are made of high density polyethylene (HDPE) and polyethylene terephthalate (PET) depending on the detergent type if it is washing liquid or soap then PET is preferable due to its transparency properties. HDPE is more preferable for other type of detergents such as bleach, shampoo etc. and these products are highly chemical which requires a good chemical resistance. Therefore, HDPE has better properties for detergent container purposes; excellent flexural strength, good impact strength, very good chemical resistance, good fatigue resistance and service temperature to 126 °C. HDPE detergent bottles can be manufactured by extrusion blow moulding as it is suitable for mass production and cheaper than other techniques.
It is important to learn a pet's behaviour. Because by learning it, you will find it easier to praise and discipline your pet. Then your pet will be very well behaved which is how you want your pet to be.
It is easier to take care of a robot pet then the real thing because you don't have to pick up after it or feed it, I have one and it is a lot of fun. (i would get a fur real friend:)
Majority of plastic bottles are made of Polyethylene Terphethalate (PET) specially for water and carbonated drinks, while many are made of High Density Polyethylene (HDPE) specially for diaries, cosmetics, and chemicals.
One tip for grooming a pet is to do it daily. It makes the job easier than if the pet is left ungroomed for a long period of time.