It all depends on the application; 12Vdc leakage in a vehicle can be a real pain to figure out, and 110Vac leaking in your house or industrial appl can waste power and cause unexpected operation.
Generally, there will be a 12+ volt rail, a 5+ volt rail and often a 3+ volt rail.
The increase in current (assuming resistance is the same and increase in voltage will lead to an increase in current) will fry your portable radio.
No. You need 12 volt AC to run a 12 volt AC motor, not 12 volt DC.
A volt - ampere is the unit for the product of voltage and current. This is power. Power = voltage x current. The unit of power is more usually called the watt. Volts x amps = watts.
A transformer's capacity is rated in volt amperes(V.A). This is the product of the secondary winding's current rating and voltage rating.
It stands for volts alternating current.
The unit of current is the ampere. The unit of potential difference, or electromagnetic force is the volt.
480 volts and 60ohm impedence current = volt/impedence current=480/60 current=8ampeares
the 220 volt bulp in 220 volt ac current
No. 110 volt is AC current
No, it is the same. DC stands for direct current rather than AC, which is alternating current.
By the volt metre.
You need to mention the Load connected to find the current.
NO! (the units of electric current is Amperes).
Current will go up by a factor of 6 times in that scenario.
Current will go up by a factor of 6 times in that scenario.
by a volt meter / ameter