XOR gate is a two way switch...beacuse connection is on when two variables are different
An AND GATE has two inputs that must both be true for the output to be true. If you have two switches in series then they must both be closed for current to flow. This is analogous to having two true signals on the input of an AND GATE.
What is Disadvantages of two way switch
yes like a hall light.
Boss Noise Suppressor and Mxr Clamp are similar. The Boss has three controls, one: Threshold -controls amount output Hz. Two: Decay -controls how tight the gate is. Three: Mode -Gate and Mute. The Clamp has one knob that controls the threshold and decay. A gate mutes Hz. at levels you set. So you can set it to mute between notes or while you're not playing.
A single-pole switch is an on/off switch that switches a single wire such as the circuit to your overhead light. A double pole switch is also an on/off switch that switches two wires. You would use this to switch as 240 volt circuit (which requires two hot wires) or if you had two circuit you wanted to switch at the same time. I've used them when I had two large light circuits that required two breakers that I wanted to switch with one switch.
And gate is similar to the function of two series switches
universal logic gate is a gate using which you can make all the logic gates there are two such gates NOR gate and NAND gate
AOI logic stands for AND OR INVERT logic. AND gate in this logic is formed by two PMOS and two NMOS FETs. Its function is to AND two bits.
When the two input terminals of a NAND gate are short circuited, it acts as a NOT gate.
Exclusive OR
Any logic gate from which all other logic gate functions can be derived. The two universal gates are NAND and NOR.
AND logic gate is used to obtain the product of two digits. It is used in various combinational and sequential circuits.
A "Nand" gate is an "And" gate with an "Inverter" added to its output. To get a logic 1 output from a "Nand" gate, you need a logic 0 on both of its inputs. If I understand your question correctly, you have three "Nand" gates. Presumably the outputs of two of them are connected to the inputs of the third. Logic 1 at both inputs of the first two "Nand" gates will produce a logic 0 output from both of them. The two logic 0's are fed to the inputs of the third "Nand" gate producing a logic 0 output from the third "Nand" gate.
The two categories for logic gates are basic logic gates and universal gates. Gates are identified by their function and universal gates are identified as NAND gate or NOR gate.
A logic gate is an elementary building block of a digital circuit. Most logic gateshave two inputs and one output. ... The following illustration and table show the circuit symbol and logic combinations for an AND gate. (In the symbol, the input terminals are at left and the output terminal is at right.)
A logic gate is a digital circuit (made of transitors) that calculates a Boolean truth value. Example operations are AND, OR, NOT.A universal logic gate is one that can be put together in different configurations to perform all the Boolean operations.There are two universal logic gates: NAND (not-AND) and NOR (not-OR).See related link.
A: Without the gate there is only two diodes back to back. The gate is the turn on switch