8051 is an old microcontroller design. It has been updated and expanded into a family of microcontrollers manufactured by several companies.
PIC is not a microcontroller, but is an extensive family of microcontrollers designed and manufactured by Microchip, Inc.
Both are quite popular, and there are many other microcontrollers available.
89c51 microcontroller is of the series of 8051,one of oldest yet commonly used microcontroller.89c51 have the less complex features then other microcontroller and it is also easily available and cheap in comparison of other microcontrollers.
the 8051 microcontrroller is the name doesnt matter easy or not....but the maiin and imp diff between both is at89s51 represents the 8051 chip no....along with the name of company i.e atmel, so all n all both are same thing ...... 89c51 have RISC architecture and contains less no of opcodes which are easy for programming. so iti is preferred than 8051.
AT89S52 is a microcontroller based on the Intel 8051 architecture and features. Concerning your question, AT89S52 is the heart of most project involving Dual Tone Multi Frequency (DTMF), that is to say it is the controller IC used in such project.
Some examples are SQLServer , MySQL, Orcle
This question is literally impossible to answer without knowing a specific part number (and manufacturer which is usually easy to determine because it is based off the part number). The 8051 was first used in the IBM type computer as the keyboard controller to send key presses to the CPU. It has since become an architecture that appears in a number of other places. There are several manufacturers that produce low cost and low power microcontrollers based upon the 8051 with other peripherals included in the same package. Because there are numerous 8051 controllers, there is no one standard for connecting them to power for each may design their controller to meet their own design guidelines. Older 8051 microcontrollers usually require a 5 V power supply. Newer 8051 microcontrollers are more likely to require a 3.3 V power supply. The only way to tell is to read the part number off the chip and look up the manufacturer's data sheets for that part number. Fortunately, most data sheets are online these days.
The 8051 is a microcontroller. It has the MCS-51 core by Intel and was designed for embedded systems in the 1980's. The name of the CMOS version is 80C51. Today the core is still used in microcontrollers from other companies like Atmel, e.g. AT89C51.
8051 Microcontrollers were popular computer chips used in Intel computers throughout the eighties and nineties. Though technology has advanced beyond their common use, they can still often be found in engineering schools as tools used in introductory microcontroller classes.
89c51 microcontroller is of the series of 8051,one of oldest yet commonly used microcontroller.89c51 have the less complex features then other microcontroller and it is also easily available and cheap in comparison of other microcontrollers.
The 8051 can directly interface with a number of I/O. The 8255 just gives you the abilty to access 3 eight bit ports using a minimum number of control bits from the 8051
The output of 8051 micro controller is active high so we must need to use the common cathode type display . it will work glow when any input is high . The anode terminals of leds's of seven segment connected to 8051's output and cathode is common and grounded . so it require common cathode because 8051 provide active high output.
the 8051 microcontrroller is the name doesnt matter easy or not....but the maiin and imp diff between both is at89s51 represents the 8051 chip no....along with the name of company i.e atmel, so all n all both are same thing ...... 89c51 have RISC architecture and contains less no of opcodes which are easy for programming. so iti is preferred than 8051.
embedded systemindustrialcomputer networkingThe 8051 has been in use in a wide number of devices, mainly because it is easy to integrate into a project or build a device around. The following are the main areas of focus: i. Energy Management:Efficient metering systems help in controlling energy usage in homes and industrial applications. These metering systems are made capable by incorporating microcontrollers.ii. Touch screens:A high number of microcontroller providers incorporate touch-sensing capabilities in their designs. Portable electronics such as cell phones, media players and gaming devices are examples of microcontroller-based touch screens.iii. Automobiles: The 8051 finds wide acceptance in providing automobile solutions. They are widely used in hybrid vehicles to manage engine variants. Additionally, functions such as cruise control and anti-brake system have been made more efficient with the use of microcontrollers.iv. Medical Devices:Portable medical devices such as blood pressure and glucose monitors use microcontrollers will to display data, thus providing higher reliability in providing medical results.source : engineersgarage.com/8051-microcontroller
anthracite
89S52 have 8KB ROM and 256bytes RAM also it supports SPI program downloading but 89C51 have 4Kb ROM, 128bytes RAM and it wont support Serial program downloading. For more details visit www.8051projects.info
The importance of math to the industry is mostly used for constructing, engineering,etc.
the 8051 is a micro controller the buttons tell the 8051 to do something there is an ir led on an output bit of the 8051 that shines on the tv ir detector it pulses a code the tv knows or window fan, ac , vcr, dvd the other output bits are used to scan multiple buttons like the difference between a rotary and touch tone Phone ive seen them with tms1000 and z8 thermostats may have 68hc11 it has 8 channel a/d right on it circuit diagram is very trivial its all in how you pulse the led
AT89S52 is a microcontroller based on the Intel 8051 architecture and features. Concerning your question, AT89S52 is the heart of most project involving Dual Tone Multi Frequency (DTMF), that is to say it is the controller IC used in such project.