Want this question answered?
includes: Quartz, Topaz, Corundum, and Diamond. Look up MOHS Hardness Scale. It shows minerals (1-10) softest to hardest. :)
There are two ways. One way is to buy a scratch test kit and follow the instructions. They will tell you to try to scratch minerals of certain hardnesses and find the hardest one it can scratch. For example, if it scratches a mineral with a hardness of 6 but not one with a hardness of 7, the hardness would be between 6 and 7. If you do not have one of those available, you can try scratching common objects. Your fingernail is 1.5, a penny is 2.5, a pocketknife blade is 5.0, window glass is 5.5, a steel file is 6.5, and quartz is 7.0.
On a three prong plug there will be a neutral blade, a "hot" blade and a ground blade. The neutral blade is wider that the "hot" blade. In North America the ground blade is "U" shaped.
The ground blade is the longest in a three blade plug.
Thunder Blade happened in 1987.
the blade would be stronger because the copper would brake easier
Yes because a copper coin (being made of copper which is a 3 on the Mohs scale of hardness), is not as hard as a knife blade (which is a 5.5 on the Mohs scale of hardness).
The Mohs Scale of Hardness is used to measure hardness of a mineral, which is its resistance to scratching. It is a quantitative scale, which relies on the relative hardness of other minerals . Higher numbered minerals scratch lower numbered ones. You can use every day objects like a glass plate, a knife, or a nail to distinguish hard and soft. Hard minerals scratch glass, but can't be scratched with a knife blade of a nail. Soft minerals will not scratch glass, but can be scratched with a knife blade or masonry nail. You can purchase hardness kits to help make these distinctions.
Diamond will scratch anything.
but a new blade, or take an engraver and scratch new grooves and pack with metal to fill gap. ive done it it works.
Use a flat,1 sided razor blade.If you keep the blade flat it wont scratch.
Most knives have a rockwell hardness of 54-62. this is for metals. minerals are considered ceramics and therefore should have more hardness. It really depends ont he pressure applied. With enogh pressure any knife can scratch any mineral.
There are two ways. One way is to buy a scratch test kit and follow the instructions. They will tell you to try to scratch minerals of certain hardnesses and find the hardest one it can scratch. For example, if it scratches a mineral with a hardness of 6 but not one with a hardness of 7, the hardness would be between 6 and 7. If you do not have one of those available, you can try scratching common objects. Your fingernail is 1.5, a penny is 2.5, a pocketknife blade is 5.0, window glass is 5.5, a steel file is 6.5, and quartz is 7.0.
includes: Quartz, Topaz, Corundum, and Diamond. Look up MOHS Hardness Scale. It shows minerals (1-10) softest to hardest. :)
A vinyl cutter is a scratch free blade which cuts all types of vinyl. However the blade is easily broken so you should use a different cutter. Hope this helps people of the world!
Razor blade cautiously not to scratch, then use Mineral Spirits wipe off excess.
Topaz is a common mineral with a hardness of 8 on the Moh's hardness scale. This means it can scratch glass and cannot be scratched with a knife blade or masonry (steel) nail.