3 gallons because it has more heat energy and it gets warmer
can't get 6 gallons of water in a 4 gallon bucket
# Start with empty buckets, and carry them to the well. # (Note that the larger is the 7-gallon bucket, and the smaller is the 4-gallon bucket.) # Fill the 4-gallon bucket with water to the top. # Empty all the water from the 4-gallon bucket into the 7-gallon bucket. # (Note that there is room in the 7-gallon bucket for exactly 3 more gallons.) # Fill the 4-gallon bucket again. # Pour from the 4-gallon bucket into the 7-gallon bucket all the water that will fit, spilling none. # (Note that since there was room for only 3 more gallons in the 7-gallon bucket, you now have 1 gallon left in the 4-gallon bucket.) # Dump out all the water from the 7-gallon bucket. (Pour it back into the well or onto some flowers so it's not wasted.) # Pour the 1 gallon of water that remains in the 4-gallon bucket into the empty 7-gallon bucket. # Refill the 4-gallon bucket completely. # Pour all the 4 gallons from the 4-gallon bucket into the 7-gallon bucket. # (Note that since the 7-gallon bucket had 1 gallon already and you added 4 gallons, you now have 5 gallons of water in the 7-gallon bucket!) # Bring back your 7-gallon bucket that's holding exactly 5 gallons of water. (Bring your 4-gallon bucket back too, in case you want to play again!)
you fill the 3 gallon bucket into the 5 gallon bucket twice 2 *3 6 gallons but the 5 gallon will only overflow once it hits 5 gallons. You get the 1 gallon half in the 3 gallon bucket and dump the water out of the 5 gallon bucket. You pour the 1 gallon left from the 3 gallon bucket into the 5 gallon bucket and then refill the 3 gallon bucket and put the 3 gallons in making 4 gallons.
Watts= rate of using energy Amps= current flow Think of it as a bucket of water with a hole in it. Watts is the amount of water leaking from the bucket (1 gallon) Amps is the size of the hole ( it took 3 minutes for that 1 gallon to leak out of the bucket)
Fill the 4 gal bucket and empty it into the 7 gal bucket. Fill the 4 gal bucket and then fill the 7 gal bucket from the 4 gal. This leaves 1 Gallon in the 4 gallon bucket. Empty the 7 gallon bucket and pour the gallon from the 4 gal lbucket into it. Fill the 4 gal bucket and pour it into the 7 gal bucket. You then have 5 gallons in the 7 gallon bucket.
You don't, because they measure different things. Temperature (degrees Celsius) describes how deep the heat is in something, whereas energy (calories) describes how much heat energy you put into it in order to make it that deep. -- I have a bucket of water on the table. -- I take a small cup, I dip a cup of water out of the bucket, and I place the cup on the table next to the bucket. -- The water in the bucket and the water in the cup both have the same temperature. -- I want to make the cup 10 degrees warmer, and I also want to make the bucket 10 degrees warmer. -- I'll need to add more calories of heat to the bucket, and fewer calories of heat to the cup, to raise both temperatures by the same number of degrees.
one tenth of a gallon
a bucket...
Pure water contains no calories.
A gallon of water weighs about 8.34 pounds. If you have a good sized bucket with a gallon of water in it and you put a 5-pound fish in the bucket, you'll have a bucket that weighs about 13.34 pounds (plus the weight of the bucket). That's as long as the bucket doesn't overflow. The fish will (usually) be neutrally bouyant in the water, and it will be essentially weightless in that water. But its weight will add to that of the water in the bucket. No, it won't weigh 15 pounds, but it will weigh in as suggested. However, the weight of the water itself will not change.
42
The weight per US gallon of water at 25 C is 8.33 pounds [per gallon. 2 gallons of water would weigh 16.66 pounds plus the weight of the bucket itself.