**192.168.142.1
It will forward the packet to R1.
It will forward the packet to R1
** the first path that the router learned.
R1 will forward the route information for subnet 192.168.100.0/30. R1 will not forward route information for subnet 192.168.100.4/30.
Configure a static route on R1 using the IP address of the serial interface on R1. Configure a default route on R1 with the exit interface Fa0/0 on R1. Configure a static route on R1 using the IP address of S0/0/0 on R2. Configure a default route on R1 using the IP address of Fa0/0 on R2.
Router> enableRouter# config tRouter(config)# ip default route [IP address]
yes press R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2,R1,R2, then press select to complete the entire game
for R1-ISP network - 192.168.23.0 mask - 255.255.255.192 next hop - 192.168.23.121 (R2's S/0/0/0 IP Address) for R2-Central network - 0.0.0.0 mask - 0.0.0.0 next hop - 192.168.23.122 (R1's S/0/0/0 IP Address) Your R2-Central is right but your R1-ISP is wrong Sir! correct R1-ISP network - 172.16.0.0 mask - 255.255.254.0 next hop - 172.16.3.97
R1(Config)#ip route x.x.x.x y.y.y.y z.z.z.z X will be the source network Y will be the source network's subnet mask Z will be the destination network. *Note you can also set the destination as an outbound interface.
R1, R1, R2, R2, Right Trigger, Left Trigger, R1, R1, R2, R2.
L1,L1,L1,R1,R1,R1,R1,R1,L2,L2,L2,L2 This may not work
R1 easily