0
Which plastic would you choose for making a window frame and why?
Wiki User
∙ 7y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is window frame made of?
plastic
How heavy is a window?
This depends entirely on the size of the window, the number of panes, the style of frame (metal, wood, plastic), and the thickness of the material.
Why is a window frame made of plastic?
the plastics which are used are mostly very strong, light and sturdy because of the particles and polymers in the plastic itself.
What are house WIND0WS made 0ut of?
The original meaning of window is eyehole so a window is a hole. Usually a window is a transparent material(eg. glass) held in place by a frame of wood or plastic.
Why is a window frame made of plastic not wood?
When solids are heated, they start to expand. This is because the particles inside vibrate more, the hotter they are.
Why do you blow dry the plastic window insulation?
Basically, in order to be able to see more clearly through it. Also, I noticed that if I dont blow the plastic-tight, then the wind has a tendancy to rattle and move the plastic sheeting back and forth so much that it will loosen and come unstuck from the window frame.
What is a casement window?
A casement window is one with a frame attached to the building the window revel and inside teh frame is a secondary frame which has a hinge on the side to open the window in or out. Some are double which means to windows one hinged on the left frame the otehr on the righ frame the these open indelendantly of each other but come together when closed in the middle to stop access and draft. A sash window is one the slides up and down with a counter-weight in teh frame to hold the open window where you require it.
How do you replace a rear door lock actuator in a 2003 land rover discovery ii?
With the front you need to remove the window frame to access the actuator. 5 bolts for the front window. 4 on all 4 corners of the frame and one directly in the middle. You might have to rip some of the plastic, use a box knife so you can tape it back up. After you remove the frame the actuator will be 100% easier to replace, you can actually see what you're doing. Also, the bolts are different sizes, do NOT THINK they can be interchanged. Long bolts go back where they came from, same with the short bolts. Good luck!ADD: Forgot to mention. Pull the frame slowly off the window, then lower the window a bit with your hand supporting it. There will be two screws holding the window to the regulator, unscrew them and lift the window out. Find a nice patch of grass to lay the window. When you put it back together remember, window in fist, bolt it in! Then, slide the frame over the window and tighten it down.Remember, roll your window all the way down with the door open. The black frame around the window. Yes you must remove the torx bolts to get the frame AND the actuator out, you can run to Lowe's and pick up the torx bits for cheap. Once the interior panel is removed there is no other metal frame just plastic wrap. It's hard to imagine but once you get frame and window out it will create A LOT more room to access the actuator. Oh, be VERY careful not to bend your window regulator rolling it up and down when the window is out, learn from my mistakes! One more thing, don't unplug your battery, you'll need to roll you window up and down to access the window regulator bolts.
What is the outer boundary of a window called?
A window frame
Frame is to picture as curtin is to?
window.
What are the parts of a window?
The parts of a window include the glass window pane and the window frame. The window also contains a locking mechanism.
What are the parts of the window?
The parts of a window include the glass window pane and the window frame. The window also contains a locking mechanism.
