The speedometer signal coomes from the ABS computer via the rear axle speed sensor. That is the sensor on the top of the rear axle.
Yes, replace the sensor and have the dash light reset.
sensor on each wheel, any of which trigger lights and make abs inoperative. must replace hub when sensor fails, quite pricey.
It varies depending on your year, make, model, and engine size.
Vehicle make, model & engine size needed first.
You have to use heat and they make a special socket.
yes and only way to fix it is to replace the sensor
Make sure you replaced the sensor with the two wire connector. Make sure the connector to the sensor is corrosion free. Replace it if it is
It should have wires plugged into it. You unplug it, unscrew the sensor and screw the new one in and plug it up. Piece of cake. Just make sure that the sensor your unscrewing is the temp sensor.
try unplugging the maf sensor and see if it will continue to run. if so replace sensor.
Replace bank one O2 sensor
The new wheel bearing includes the ABS sensor. They are not available separately.
probably misaligned your crank sensor.. I'm dealing with the same problem, might need to replace with new and make sure to gap properly.