Want this question answered?
It depends on the temperature of the water. If the fresh water is warmer, then it will melt quickest in the fresh water. If the saltwater is warmer, then it will melt quickest in the saltwater. If the water is frozen (regardless of saltwater or freshwater), the ice won't melt at all.
The shallower the water is, the warmer it can be. Direct sunlight will warm the water and as the water deepens, the warmth from the sun cannot reach as far. This creates a slightly colder temperature.
yes because the magnet will reach its curie temprature and loose stregth
Water
Cold water would freeze the fastest because freezing is a physical change brought on by temperature change, and the temperature of cold water is closer to freezing temperature than boiling or room temperature water. Therefore, it would take less time to reach freezing temperature.
Drink room temperature water.
Yes, salt water can reach 225 degrees but The water temperature should be from 75-80 degrees Fahrenheit. ... This will let the water reach the normal temperature, ...
The temperature of the water and the something will reach an equillibrium somewhere between the two and eventually both will reach room temperature. Time depends on the temperature and mass of the something and the temperature and volume of the water.
In order for water to reach it's boiling point, then the temperature has to reach 212 degrees. 212 degrees is for about sea level. it will vary depending on where you are.
It depends on the temperature of the water. If the fresh water is warmer, then it will melt quickest in the fresh water. If the saltwater is warmer, then it will melt quickest in the saltwater. If the water is frozen (regardless of saltwater or freshwater), the ice won't melt at all.
No.
Water is not the most quickest liquid to evaporate.
It depends on which temperature you want to reach and at which temperature is the water before you start heating it!
Evaporation is possible at any temperature.
The incoming water temperature of both a high temperature commercial dishwasher and a low temperature commercial machine must be at least 110 degrees Fahrenheit. High-temperature machines reach normally 180 degrees with a 40-70% water booster heater and low-temperature machines only reach 140 degrees Fahrenheit.
To sterilise effectively the water in the autoclave needs to reach a temperature of 120°C. Since water at atmospheric pressure boils at 100°C, a higher pressure is needed to reach that temperature.
When allowed to stand for long enough, the final temperature will reach room temperature.