You would use a Loopback Plug, this allow an output signal to be returned as input.
A loop back plug
Loop-Back Plug
A Loop-back plug.
Memory Diagnostics
There is no fuel pressure test port on an 02 focus. The computer controls the fuel pressure on these and as such the factory approved method of monitoring fuel pressure is to watch the PID on your scan tool. They do make one that can be added on though between the fuel line and the fuel rail. A quick google search should yield plenty of results to help find one.
First, connect the scan tool to the DTC port located under the driver's side dash next to the steering column. Run the test, write down the codes, finish the test by following the instruction manual in order to correct the malfunction. Then disconnect the scan tool and replace the DTC port cap.?æ
Definitely! DNA could be the one off the culprit; test the clothing, tool, window, weapon or any aid, and link the tool to the culprit.
Obd-on board diagnostic. The port is the plug the scan tool or code reader connects to.
port sacn tool
One can download a port scanning tool on file sharing sites or on a site that promotes this product. Be careful when downloading and check for viruses or any spyware.
This care should be OBD 2. As such you will need an OBD2 scan tool. Just connect the code reader to the diagnosis port with the key on engine not running. Port should be located driver's side under edge of dash.
qf-test stands for quality first test. The tool is provided by QFS, which stands for quality first software.
Electricity and water don't mix. You should not have a socket in the shower.