First, connect the scan tool to the DTC port located under the driver's side dash next to the steering column. Run the test, write down the codes, finish the test by following the instruction manual in order to correct the malfunction. Then disconnect the scan tool and replace the DTC port cap.?æ
If the light is on and there are no codes, you have a computer failure.
If the check engine light is on for a 95 Lincoln town car, check the computer codes. a problem could cause low fuel economy, or cause a part failure over time.
Auto Zone will check your computer codes for FREE. have your codes check and go from there.
Auto Zone will read your computer codes for FREE. And if you ask they will also erase codes. After getting correct codes and finding out exactly what is wrong. Then go from there.
To check engine light codes one would have to bring your vehicle to a mechanic who can use a computer to check the computer chip that regulates this function.
The light is on for a reason, I would suggest getting a analyzer to check the computer codes and find out why it came on in first place. Erasing the codes and not repairing the problem will only fix it temporarily
Go to a local Autozone, Advance Auto Parts, or Pep Boys. They will scan your computer for the error codes that are making your CED light come on for free. Then you can go from there.
You could have a wiring issue between the computer and the light, or you have a bad computer.
There are dozens of codes. Be specific as to what code you are getting.
There are many reasons that the AIRBAG light come come on. The computer will need to be scanned to get the troubles codes. Trouble codes assist in diagnosis of what circuit has a problem. I would suggest getting that done as soon as possible, because an AIBAG light on may mean that the airbags will not deploy in a collision. ------------------------------------------------------------------------------------------------------------
Suggest you have it checked for trouble codes. The engine computer and airbag system should both have codes.
Disconnect the battery - wait a few minutes and reconnect ____________________________________________ Your best and correct way to clear your computer of any codes is to have a code reader. Auto Zone will check and clear your computer codes for FREE.