i/o card
PCI
i/o card
Using jumpers or rotary dials (or another type of switch) on the device itself
RAID and SCSI are completely different things.RAID = Redundant Array of Independent Disks.SCSI = Small Computer System Interface.SCSI is the type of interface that exists on the physical hard drive for connecting it to a host device. The host, be it a computer or a RAID would need to also support the SCSI interface.RAID is a cluster of hard drives which work together as a storage system. RAID could use any type of interface, including SCSI.
SCSI - Small Computer System InterfaceSCSI is an industry standard system interface, which allows multiple peripheral devices to be installed on the system. The number of devices that can be installed depends on the type of SCSI Host adapter that you have installed in your system. Most SCSI systems have an older "Narrow" 8-bit SCSI host adapter, which have 8-bit data paths and allow for up to 7 devices to be installed on the same channel. Newer "Wide" Host adapters have 16-bit wide data paths and provide support for up to 15 devices. A SCSI ID is a unique identifier assigned to each SCSI device on the bus. It determines the SCSI device's priority. There are 16 IDs, ranging from 0 to 15. The order of the priorities is a bit unusual. From highest priority to lowest they are: 7, 6, 5, 4, 3, 2, 1, 0, 15, 14, 13, 12 ,11, 10, 9, 8. ID 7 is almost always reserved for the SCSI Host Adapter. The other IDs are free to be assigned as desired, although your computer may have assigned them automatically.Never assign the same ID to more than one device.
SCSI Harddrive:80-pin Connector The SCA interface was designed to provide a standard connection for systems using hot swappable drives. SCA interface drives connect to a SCSI backplane that provides power, configuration settings such as SCSI ID, and termination of the SCSI bus.
to ping a local host you would type what address
Parallel printers and scsi
50pin
com2
Active
Active