0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What are types of windings in low voltag windings?
to achieve high voltage Wave type winding is used...... For high current Lap winding is used.
Will a generator work if the wire is not spinning but the magnet is?
Yes. One winding/magnet must spin. Some generators have two windings, one is stationary (the stator), and the other spins (the rotor). One of these windings is energized, making it an electromagnet (called the field winding). In most generators of this type, the field winding is the one that is spinning. This is due to the fact that the stationary winding is the actual output of the generator, thus experiences high currents - and it is easier to pass these high currents through stationary busbars to the grid as opposed to rotating equipment.
In motor winding what is the difference between a lap winding and a wave winding?
When electricians and electrical engineers/repairmen are called upon to assess troubles in generators and motors, they often rewind different types of these machines. There are two families of armature (closed-circuit) windings: lap winding and wave winding, described by the commutator pitch used for winding. In mechanical terms, armature windings consist of coils connected to a commutator in Read more....direct-current machines; or coils are connected together in alternating-current machines to form groups or series.Lap winding, also called parallel or multiple winding, is the process of winding elements or coils lapping back when wound on armature cores. Lap circuits are connected in parallel between brushes. The front and back pitches are odd with opposite signs. Winding pitch equals the algebraic sum of the front and back pitches. The end of a coil is connected to the commutator and the start of the next coil under the same two poles. Single-lap windings always have the same number of current paths as field poles while double-lap windings have twice as many current paths as field poles. Triple-lap windings have three times the number of current paths as field poles.The zig-zag or wavy path of winding through slots of armatures defines single (two-circuit) wave windings and multiplex (series-parallel) windings. Half of the armature coils is connected in series and the other half is connected in parallel between brushes, no matter the number of poles. Winding pitch is equal to the sum of the front and back pitches, which both must be odd with the same sign. The end of a coil is joined to the armature and the beginning of another under the next two poles. A single-wave winding has two current paths between brush sets. The double-wave winding has four current paths between brush sets; and the triple-wave winding has six current paths.Wave winding is used mostly in small and medium sized machines (500-600 volts) for keeping the number of coils as small as possible. Applications requiring high voltages at low currents use wave windings while lap windings are used for lower voltage, higher current applications. Wave windings, for a given number of poles and armature conductors, give more emf (electric and magnetic fields) than lap windings.Examples of suitable symmetrical armature windings for DC-machines with different poles are: for two-pole machines, two-circuit lap winding is preferred over wave winding; for four-pole machines, two-circuit wave winding or four-circuit lap winding is suggested. Six-pole machines should use two-circuit wave or six-circuit lap winding since four-circuit wave winding is asymmetrical.
What are the three main part of single-phase motors?
The main parts are the stator and the rotor.After that depends on the type of single phase motor. This includes capacitors (start and/or run),centrifugal switch (stationary and rotary) Also there are usually two windings,a start and a run winding. In its most basic form the start and run winding are connected together at one end of the windings (common) the other end of the run winding connected via a centrifugal switch and/or run capacitor to the other end of the start winding. Power is supplies to the run winding terminals. The start capacitor is fitted in series with the centrifugal switch, allowing it to be disconnected once rotation speed is reached.
How many types of winding are used in AC and DC motors?
IN DC MOTORThere are 2 types of windings:1. Field windingOn poles core which are on stator body.These are always concentrated type.2. Armature windingOn rotor on motor may be simplex or multiplex and lap or wave connected.IN AC (Synchronous ) MOTOR3-phase star or delta connected on stator (armature ) suppliedby 3 phase may be concentrated or distributed (usually preferred) .Rotor (field ) has concentrared in salient pole type nd distributed in cylindrical type supplied by DC supply.IN AC ( Induction ) MOTOR3-phase (star or delta connected) distributed winding on stator and wound rotor .In squirrel cage rotor short circuted copper bars are used.
What type of dc motor has its field winding in parallel with its armature windings?
Shunt Motor
What is the difference between a field winding and an armature winding in any machine?
simply saying u that field winding is a winding present at the stator of the motor and is used to produce the magnetic field and the armature winding is the winding present in the rotor and is used to rotate the shaft of the motor. there are some machines with permanent magnets, those permanent magnets are used as the major source of magnetic flux in the machine instead of the field winding .
What is shunt current and a armature current?
The terms 'shunt' and 'armature' apply to a particular type of d.c. motor, in which the field windings are connected in parallel with the armature windings. 'Shunt' is an archaic term for 'parallel', so the term 'shunt', in this context, means that the field winding is connected in parallel with the armature winding. The terms 'shunt current' and 'armature current', then describe the currents flowing in the shunt winding and armature winding, respectively.
What type of current flows in stator and rotor winding of a dc shunt generator?
The field winding in the stator is exposed to the full current generated by the rotor's winding.
What are types of windings in low voltag windings?
to achieve high voltage Wave type winding is used...... For high current Lap winding is used.
Which types of windings used in transformer?
Clarify your question. What do you mean by 'type' of winding?
Will a generator work if the wire is not spinning but the magnet is?
Yes. One winding/magnet must spin. Some generators have two windings, one is stationary (the stator), and the other spins (the rotor). One of these windings is energized, making it an electromagnet (called the field winding). In most generators of this type, the field winding is the one that is spinning. This is due to the fact that the stationary winding is the actual output of the generator, thus experiences high currents - and it is easier to pass these high currents through stationary busbars to the grid as opposed to rotating equipment.
What is DC shunt motor?
A shunt DC motor connects the armature and field windings in parallel or shunt with a common D.C. power source. This type of motor has good speed regulation even as the load varies, but does not have the starting torque of a series DC motor
Answering Which one is a separately excited generator - ac generator or dc generator?
Excitation is the phenomenon by which you control the excitation of field winding of a generator. In DC generator field winding is placed on stator and this field winding can be self excited or seperately excited depending upon the type on generator used. AC generators can also be self excited or seperately excited type but field winding is placed on rotor nad armature winding on stator.
How does a generator make energy?
A generator doesn't store energy it just transforms it typically from burning a fuel (like gasoline) to mechanical energy (like an internal combustion engine) then from mechanical energy to electrical current.
In motor winding what is the difference between a lap winding and a wave winding?
When electricians and electrical engineers/repairmen are called upon to assess troubles in generators and motors, they often rewind different types of these machines. There are two families of armature (closed-circuit) windings: lap winding and wave winding, described by the commutator pitch used for winding. In mechanical terms, armature windings consist of coils connected to a commutator in Read more....direct-current machines; or coils are connected together in alternating-current machines to form groups or series.Lap winding, also called parallel or multiple winding, is the process of winding elements or coils lapping back when wound on armature cores. Lap circuits are connected in parallel between brushes. The front and back pitches are odd with opposite signs. Winding pitch equals the algebraic sum of the front and back pitches. The end of a coil is connected to the commutator and the start of the next coil under the same two poles. Single-lap windings always have the same number of current paths as field poles while double-lap windings have twice as many current paths as field poles. Triple-lap windings have three times the number of current paths as field poles.The zig-zag or wavy path of winding through slots of armatures defines single (two-circuit) wave windings and multiplex (series-parallel) windings. Half of the armature coils is connected in series and the other half is connected in parallel between brushes, no matter the number of poles. Winding pitch is equal to the sum of the front and back pitches, which both must be odd with the same sign. The end of a coil is joined to the armature and the beginning of another under the next two poles. A single-wave winding has two current paths between brush sets. The double-wave winding has four current paths between brush sets; and the triple-wave winding has six current paths.Wave winding is used mostly in small and medium sized machines (500-600 volts) for keeping the number of coils as small as possible. Applications requiring high voltages at low currents use wave windings while lap windings are used for lower voltage, higher current applications. Wave windings, for a given number of poles and armature conductors, give more emf (electric and magnetic fields) than lap windings.Examples of suitable symmetrical armature windings for DC-machines with different poles are: for two-pole machines, two-circuit lap winding is preferred over wave winding; for four-pole machines, two-circuit wave winding or four-circuit lap winding is suggested. Six-pole machines should use two-circuit wave or six-circuit lap winding since four-circuit wave winding is asymmetrical.
How Synchronous motor work with principal?
A synchronous motor comprises of a stator windings and a rotor with a squirrel cage and inside that is windings(coils). At starting, this motor is an induction motor running with slip. After the rotor has reached a certain speed, a DC current is applied to the windings inside the squirrel cage. A fixed field is induced in these windings. This field locks in with the synchronous rotating magnetic flux of the stator windings. The rotating stator windings then pull the rotor along. The amount of excitation current can be used to control the power factor of the motor, making this a popular type of motor for high power use with a constant mechanical load.
