shunt field winding are made with many turn of small wire.
The starting winding, in single phase motors.
The 'input' side of a transformer is called its 'primary' side, whereas the 'output' side is termed its 'secondary' side. The ratio of its secondary to primary voltage is equal to the ratio of the number of turns in the secondary windings to the number of turns in the primary winding. So if, for example, a transformer's secondary winding has twice as many turns as its primary winding, then the secondary winding will produce twice the voltage applied to the primary winding.
Yes, although the question is poorly formed. The ratio of the voltage in the primary winding to the voltage in the secondary winding is the same as the ratio of the number of turns in the primary winding to the number of turns in the secondary winding. For example, if the primary had 1200 turns with the secondary having 120 turns, and the primary voltage was 50 volts, then the secondary would be 5 volts. This is a ratio of 10:1.
primary winding and secondary winding how this turn.
Starting winding has more resistance and less induction than main winding, this means has smaller diameter and less turns.
Yes, since it depends on the number of turns on primary & secondary winding.
Transformer ratio, more correctly turns ratio, is the number of turns in the primary winding divided by the number of turns in the secondary winding.
The 'input' side of a transformer is called its 'primary' side, whereas the 'output' side is termed its 'secondary' side. The ratio of its secondary to primary voltage is equal to the ratio of the number of turns in the secondary windings to the number of turns in the primary winding. So if, for example, a transformer's secondary winding has twice as many turns as its primary winding, then the secondary winding will produce twice the voltage applied to the primary winding.
Yes, although the question is poorly formed. The ratio of the voltage in the primary winding to the voltage in the secondary winding is the same as the ratio of the number of turns in the primary winding to the number of turns in the secondary winding. For example, if the primary had 1200 turns with the secondary having 120 turns, and the primary voltage was 50 volts, then the secondary would be 5 volts. This is a ratio of 10:1.
-- diameter of the current-carrying winding around it -- number of turns of wire in the winding -- magnitude of the current in the winding -- material comprising the core of the magnet
primary winding and secondary winding how this turn.
Number of turns in the secondary winding define the voltage. Change the number of turn to change the voltage.
Starting winding has more resistance and less induction than main winding, this means has smaller diameter and less turns.
Unfortunately, it is not practical to find the number of turns in a transformer's windings. However, what matters is its turns ratio. This can be done by applying a low AC voltage to the higher-voltage* winding, and measuring the resulting voltage appearing across the lower-voltage winding. The turns ratio will be approximately the same as the voltage ratio.(*NOT THE OTHER WAY AROUND! Or you may up with a dangerously-high voltage induced into the higher-voltage winding!)
K is the ratio of the number of secondary winding turns of wire around the transformer core verses the number of turns on the primary.
Yes, since it depends on the number of turns on primary & secondary winding.
start winding is thicker with less number of winding whereas run winding is less thicker than start winding but with more number of winding. As we know inductance depends upon numbers of turns of winding so run winding will have more inductance.
unequal coiling of wires