Howard Aiken developed the first relay operated computer that is Howard Mark II.
The fused lead goes to the fuel pump relay in the relay center then to the fuel pump in the gas tank. The relay is operated by the engine control module computer
CT (Current Transformer ) is essential whether is electronic relay or electromagnetic relay. A relay requires the CT to sense the line current.
Not sure why you'd ask such a question in the first place, but there is no shut off valve. The fuel pump (which is inside the tank) is operated by a relay (which receives a signal from the computer). Don't know if any of that helps.
Yes, it is an electrically operated switch.
The fuel pump relay has a secondary control circuit operated by the computer. Upon cranking the oil presuure has to reach 20+ psi befor the computer singals the distributor to fire and the fuel pump to kick in.
The "main relay" is inside the abs computer. If you have the Main Relay code, the abs computer has failed.
The engine computer via a relay.The engine computer via a relay.
The synchronous generator when act as a motor that relay is operated. or reverse power relay is acted. mainly it sence thet direction of power flow direction
A relay is an electronic switching device that opens or closes a circuit. An electromechanical relay would be one that is opereated remotely using an electrical circuit that mechanically operated the relay, which in turn opens/closes the second ciruit.
The chime comes directly out of the body computer. There is no relay.The chime comes directly out of the body computer. There is no relay.
ABC was the size of a desk, but was not programable or general purpose.ENIAC was the size of a room, 40 panels of standard 19 inch relay rack.
both,mate,the power comes through a fuse and then through a relay switch.