In November of 1977, Robert. E. Khan demonstrated a crude TCP gateway between ARPANET (ancestor of the modern internet) and the Packet Radio network. TCP/IP emerged by the end of 1978, and replaced older, less flexible network protocols (ie- NCP, or Network Control Program) for ARPANET on January 1st, 1983.
However, there is no 'first IP address' in use today. The numbers are numerically insignificant, dynamic, and divided into ranges (or classes) reserved for specific uses (eg- public or private network addresses). This means that most addresses start in a range above anything that could be considered the 'first' IP address numerically, and unless statically assigned, can be changed and re-assigned arbitrarily.
Attempting to set your IP address (private OR public) to 0.0.0.1 would result in an error, and as far as I know, numbers starting in this range (with zero as the first octet) are rarely used in anything but special cases and unusual configurations (if at all). This means, conventionally, that no computer or networked device actually holds the (numerically) first IP address.
There are five IP classes that IP addresses are divided into. The IP address 185 is a class B address. Class B IP addresses have the first three numbers of 128 to 191.
172.16.0.0 is itself a private IP address. (IP addresses from 172.16.0.0 to 172. 31.255.255 are all private IP addresses. Other private IP addresses are 10.X.X.X and 192.168.X.X where X can be from 0 to 255). But it's not usable as an IP address for a device such as a PC or host. This is because it's the first address and, by convention, the first address of a network is used to indicate its network address.
The First Octet is used to derive the Class of an IP address...... Eg: 192.168.1.1------ The IP class for this IP add is CLASS "C" as the first Octet is 192.
People have different ip addresses
In Windows, under TCP/IP properties, you have the option to set a specific IP address, or to get an IP address automatically (with the DHCP protocol).If you want to force the DHCP server to assign a new IP address, you can type the following two commands in a command window (not sure if the first is really necessary):ipconfig /releaseipconfig /renewIn Windows, under TCP/IP properties, you have the option to set a specific IP address, or to get an IP address automatically (with the DHCP protocol).If you want to force the DHCP server to assign a new IP address, you can type the following two commands in a command window (not sure if the first is really necessary):ipconfig /releaseipconfig /renewIn Windows, under TCP/IP properties, you have the option to set a specific IP address, or to get an IP address automatically (with the DHCP protocol).If you want to force the DHCP server to assign a new IP address, you can type the following two commands in a command window (not sure if the first is really necessary):ipconfig /releaseipconfig /renewIn Windows, under TCP/IP properties, you have the option to set a specific IP address, or to get an IP address automatically (with the DHCP protocol).If you want to force the DHCP server to assign a new IP address, you can type the following two commands in a command window (not sure if the first is really necessary):ipconfig /releaseipconfig /renew
ping with ip address. ex: ping 124.123.97.47
There are several sites that one can get help on the topic "What is my IP Address?" These sites include What Is My IP Address, What Is My IP, My IP Address, and Trace My IP.
The network address of this ip address is 192.150.8 and 24 is host ip address
First you have to configure your NIC card, preferably with a static IP address. Then, tell the webserver software which port and which address to listen on.
The source address contains the IP address of the computer (or other host) that sends the IP packet.The source address contains the IP address of the computer (or other host) that sends the IP packet.The source address contains the IP address of the computer (or other host) that sends the IP packet.The source address contains the IP address of the computer (or other host) that sends the IP packet.
A "host" is simply any point that has an IP address. Typically a computer, but it may also be a printer, a switch, a router port.A "host IP number" is an IP number that can be assigned to a host. This excludes the first and last IP address of each network, which can't be assigned to hosts.A "host" is simply any point that has an IP address. Typically a computer, but it may also be a printer, a switch, a router port.A "host IP number" is an IP number that can be assigned to a host. This excludes the first and last IP address of each network, which can't be assigned to hosts.A "host" is simply any point that has an IP address. Typically a computer, but it may also be a printer, a switch, a router port.A "host IP number" is an IP number that can be assigned to a host. This excludes the first and last IP address of each network, which can't be assigned to hosts.A "host" is simply any point that has an IP address. Typically a computer, but it may also be a printer, a switch, a router port.A "host IP number" is an IP number that can be assigned to a host. This excludes the first and last IP address of each network, which can't be assigned to hosts.
The IP address, '10.11.12.13' is not a valid address. This IP address is just a sample that is used.