When the design says 4.9v zener diode that is all I would put. The more complicated an alternative you try the more things that can go wrong. A silicon diode is not the same as a zener diode, and cannot be used to replace a zener, with reasonable expectation that the circuit will continue to operate as designed.
The function of a zener diode is for it to act as a voltage regulator in the breakdown region.
No. The purpose of the zener diode is to clip (turn on) at a certain voltage. A capacitor will not exhibit this behavior.
Reverse bias
Yes. The intended use of a zener diode is to be reverse biased at the breakdown voltage. In this mode, the zener has high slope in the current to voltage curve, making it a good choice for voltage regulation.
zener resistance of a zener diode is the resistance of the zener diode but which is the resistance of a diode
Zener diode is heavily doped pn junction diode.
zener diode :zener diode operates under reverse bias voltageideal diode :ideal diode operates under forward bias voltage
A zener diode cannot be used as switch.
zener diode is a revers bias diode which used for voltage regulation.
The leakage current of a (zener) diode is the current that leaks when a diode is connected in reverse biased.
The leakage current of a (zener) diode is the current that leaks when a diode is connected in reverse biased.
The difference between the pn-junction diode and the zener diode is that the pn-junction diode is used for rectification while the zener diode is used for rectification and stabilization. Also, the zener diode can function in the breakdown region while the pn-juntion diode can not function in that regime.
Since they are in parallel, the 3.3V zener diode will "kick in" first when you reach 3.3V, and the circuit will pretty much act the same as if the 7V zener diode isn't there at all.
zener
charles zener
Yes **************************************** Yes they can but there are pitfalls. A normal diode will have a high reverse breakdown voltage. A zener has a relatively low breakdown voltage (its "zener"voltage). If a zener diode is used as a rectifier it must have a zener voltage at least twice the peak of the applied a.c.