the car that was in the bus stop of course...
Plug a laptop or code reader into the diagnostics socket, find out what the fault is, or was, clear the fault if it's still on or cancel the alarm thereby turning out the fault light if it's just a transitory fault which has already cleared. If you're in the AA or RAC, call 'em out to do it.
If your check engine light is on - get the engine checked by a qualified mechanic - don't try turning the light off - it is telling you there is a fault in your engine.
This question is very broad. More specifics are needed to determine fault. Who was turning left? Were you at a light, if so did you have a green turn arrow or light? Who had the right of way. Were there cars behind you, in front of you? What was your speed? Were there witnesses? Were the police called, is there a report? Were you cited or ticketed?
The light is on because there is a fault somewher. To turn the light of you fix the fault.
Even though the weather played a significant part in the accident, the other driver is still at fault. The basis being, they should have allowed for the hazardous driving conditions.
What ever car was turning is at fault unless they had a green arrow. you have the right away when it comes to 4 way stops with the turn lights.. if the turn light isn't on then they have to wait for you.
It is blinking by a lamp first turning on, then turning off, then turning on, then turning off...
Camry 98 turning light doesn't work?
Turn on the light, turn off the light. Turning off the light, nullifies the action of turning on the light -- to undo.
It is a dual purpose warning light. It will illuminate if the coolant temperature gets too high, and, if air conditioning is fitted, certain faults will cause the warning light to flash. If it is an air conditioning fault then turning the air conditioning off will stop the light from flashing.
when gearbox fault light comes on, it means there is a problem with the gearbox. you need to take vehicle to a mechanic
The change oil light is reset by turning the key on, engine off, and pressing the gas pedal three times.The check engine light can only be reset with a scan tool. The cause of the fault needs repaired or the light will return.