The revolver is probably an Iver Johnson. The grips were after-market grips, distributed by Siles.
Way to little information. What kind of Colt Revolver? Single Action Army? Python? Diamondback? What condition is it in? A set of new ivory grips with a steer head would set you back 800 or so.
Try gunpartscorp.com
No, you can fix it with a flat head screw driver and vise grips.
He was shot in the head by John Hinkley with a .22 revolver.
The address of the Bay Head Reading Center is: 136 Meadow Avenue, Bay Head, 08742 M
The phone number of the Bay Head Reading Center is: 732-892-0662.
Yes your eyes are in the centre of your head.
Begin by tightening the head bolts on each corner of the head. Next, tighten the center head bolts. Tighten the bolts on each end of the head and move towards the center.
remove clips easy bit , cold chisel under the head knocked it up a bit clamped mole grips to head knocked up a bit more second pair of mole grips knocked it a bit more etc etc o wd40 and a load of cursing and patience
best bet, get yourself a good pair of vise grips (locking plyers). If you do not own a pair, you local auto parts store or Home center sells them. If you can not get them off with vise grips, you will have to take it to you local mechanic. Have somebody WELD a rod onto the stripped plug & use that 2 turn it -- then throw the rod & plug away & put in your new drain plug with a new gasket for the plug.
The center of the head pin is on the 20th board.
The pineal gland is at or very near the center of the brain and it produces serotonin.