A professional plumber, or at least, someone experienced installing hot water tanks.
An electric can be installed by any plumber or smart handyman. A gas one needs a gas fitter.
No this is not necessary. Install the pipes as per usual. You can insulate the hot water pipes up to two meters or up to two yards from the hot water outlet from the hot water tank to prevent this. No this is not necessary. Install the pipes as per usual. You can insulate the hot water pipes up to two meters or up to two yards from the hot water outlet from the hot water tank to prevent this.
30gal.hot water tank cost+installation
Install on cold water line.
Yes. If you change any fixture or hot water tank you must install a valve that limits the hot water delivery at the new fixture to 48C. If you change the hot water tank you must either put a valve on all fixtures except the diswasher and clothes washer or add a mixing vavle on the output of the tank.
There has to be a tank pan under the hot water tank with a drain hooked up to the pan. If the tank leaks, it will go into the pan which will flow into the pipe that you have to have hooked up to the sewage system.
$5,950.97 That is including tax
Yes, but there still is all the water stored in the tank plus the water stored in the existing hot water lines throughout your home that will eventually leak out.If you intend to install a hot water heater (HWH) yourself and you do not have valves to isolate the existing plumbing then turn off your main water supply, drain the water from your home using the lowest level sink, then attach a hose to the bottom of the HWH and drain the tank. When you install the new HWH install new shutoff valves. (Hint: Check with your local city plumbing and see if an expansion tank is required.)
Installation instructions come with tankless water heater, but would recommend someone experienced enough to install.
Hook it up on the cold inlet side where you have room.
If you have a leak on the hot water somewhere in the house and the water input into the tank is not running, the tank will lose it's water. And if it is an electric tank, the elements will burn out. Gas hot water tank should be no problem. Pressure valve does not have to be open.
You could install a recirculating pump near your hot water tank and run a pipe from the furthest fixture that has hot water to this pump. This pump would then circulate the hot water back into the COLD inlet of the hot water tank and have hot water available at each fixture when you want. You would require a check valve where the recirculated water enters the cold supply to your hot water tank. CALL A PLUMBER THAT HAS FREE ESTIMATES!!!
You could install a recirculating pump near your hot water tank and run a pipe from the furthest fixture that has hot water to this pump. This pump would then circulate the hot water back into the COLD inlet of the hot water tank and have hot water available at each fixture when you want. You would require a check valve where the recirculated water enters the cold supply to your hot water tank. CALL A PLUMBER THAT HAS FREE ESTIMATES!!!