0
I think it was the Germans.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Can you put a scope on a 22 rifle?
Naturally.
Can you put a ziess 3-12x50 scope on a 12lb air rifle?
Only if the scope is designed for an air rifle. Because of the recoil being different on an air rifle than a firearms rifle. Air rifle scopes are made differently than firearms scopes. A firearms scope can break it's glass mounts if it is used on an air rifle.
Can you put a scope on a 270 bolt action rifle?
if it did not come with the provision to mount a scope on it you can take it to a gunsmith and have it drilled and tapped for one.
What scope's work with the daisy power line 880?
The 880 has an 11 mm dovetail mount. This BB/pellet rifle is fairly inexpensive and it works fine with a simple 4x10 scope, to put a more powerful scope would cost more than the rifle's base price. Daisy makes a 4x10 scope that works fine with this rifle
Scope Mounts - Getting what you pay for?
What is a scope mountYou are a hunter, or new to hunting. After finding the rifle you want and the scope you want, you still need to mount the scope to the rifle. Scope mounts hold the scope securely to the rifle.Getting what you pay forBuying a rifle and scope is much like finding a wife, it is strictly a matter of personal taste. Too frequently new hunters will spend exorbitant amounts on the rifle and scope, but skimp on the mounts. This is a costly mistake.The mounts hold your scope securely and help keep your scope true. If you are willing to drop several hundred to thousands of dollars on a scope, the least you should do is consider quality scope mounts. The rifle is only as good as the person behind it, but the finest shooter in the world will miss if the scope is not spot on. Quality, durable mounts will last the life of the rifle, scope and possibly outlast the owner.How to mount scope mountsMore often than not the gun shop where you buy your new rifle will mount your scope for you at no charge. If you are a do it yourself type, here are a few suggestions.Place the bases on the rifle. Check and be absolutely certain they are straight. Tighten them hand tight with the hand tools provided with the mounts. Put your scope in the mounts. Check your eye relief. This is the distance from the optical part of the scope to your eye. Too far and you will not be able to see out of the scope correctly. Too close and when you sight it in for the first time, you are going to have a black eye and possibly need stitches.Once your eye relief is set and you are happy, put the top part of your mounts on your scope. Place the screws in the holes and tighten. As you tighten the screws, tighten each one a bit at a time to be sure the mount is secured evenly. Before the final tighten, check your scope to make sure it is level. Finish and go sight in!
How do you put a scope on a crosman tac 77 elite air rifle?
Most people have trouble mounting scopes. 1. Mount the rear scope base ring on the rifle first. Just the bottom half. Make it tight 2. Mount the front bottom half of the scope ring next. Use the scope to align the fit to your eve. Do not mount the top of the scope rings in this step. 3. with the scope adjusted to your eye mount the top of the scope rings but not real tight just snug. Look through the scope to make sure the cross-hairs are aligned with the barrel. 4. with an Allen wrench or screwdriver tighten down the rings using a crossover pattern. (left rear screw. front right screw. right rear screw. left front screw) a little at a time until tight. ) Now do the same to the other scope ring. Do not over tighten and strip out the screw holes. 5. most people try to put the rings on the scope first then try to put in on the rifle. This never works it will always come loose. The scope ring bases have to be mounted on the rifle first, then the scope comes last. your next step is aligning the scope to your target but you didn't ask about that so I'll leave that for another question
What would be a starting paintball sniper?
The browning is typically your common sniper rifle with a scope added , but you could use a M240 , and put a scope on it , LIKE A BOSS
For call of duty world at war can you put a aperture scope on a bolt action rifle?
No, however you are able to get a sniper scope for all of the bolt action rifles.
How to install a rifle scope?
Here's the basics on mounting the scope on a rifle. ( Assuming you have a scope mount on the rifle.) 1. Place the bottom half of the scope rings on the rifle first (Without the scope attached.) 2. Place the scope on the bottom half of the rings and adjust the scope mounts to comfortably fit your eye. When adjusted, tighten down the bottom half of scope rings to the rifle mount. ( The scope should have one cross hair adjustment at the top and one on the right.) 3. Place the scope in the rings and then put the top half of the rings on. Tighten them down, but not VICE tight, just loose. You still want to move the scope some. 4. Look through the scope and align the cross hairs level with the rifle barrel. The Vertical line should be straight up and down at a right angle with the barrel. 5. when you have the scope adjusted to your eye and the barrel of the rifle, tighten the top scope rings in a crisscross pattern a little at a time. Don't vice one down then go to the next one. Do it a few turns on each one until they are tight. A final note. If you have a small screw hole and screw at the back end of the scope mount (on the rifle) you may want to place the rear scope ring against that screw. This is a scope stop. This will keep the scope from moving back from the recoil. Some scope mounts have a long pad at the rear of the scope mount that acts the same way. It's usually necessary on high powered rifles not 22's.
Can you you mount an aim sports 3-9x40 on a pellet gun?
It's not practical unless it is a Pistol Scope. With rifle scopes you must put your eye just behind the scope to aim. A rifle scope will fit a pistol but then you have the problem of putting the scope and pistol up to your face to aim. A pistol scope is designed to be held at arms length and still see enough to aim the pistol.
How do you scope a rifle?
You are asking this question in the Shotgun category, so I must say that you don't scope a shotgun. Here's the basics on mounting the scope on a rifle. ( Assuming you have a scope mount on the rifle.) 1. Place the bottom half of the scope rings on the rifle first (Without the scope attached.) 2. Place the scope on the bottom half of the rings and adjust the scope mounts to comfortably fit your eye. When adjusted, tighten down the bottom half of scope rings to the rifle mount. ( The scope should have one cross hair adjustment at the top and one on the right.) 3. Place the scope in the rings and then put the top half of the rings on. Tighten them down, but not VICE tight, just loose. You still want to move the scope some. 4. Look through the scope and align the cross hairs level with the rifle barrel. The Vertical line should be straight up and down at a right angle with the barrel. 5. when you have the scope adjusted to your eye and the barrel of the rifle, tighten the top scope rings in a crisscross pattern a little at a time. Don't vice one down then go to the next one. Do it a few turns on each one until they are tight. A final note. If you have a small screw hole and screw at the back end of the scope mount (on the rifle) you may want to place the rear scope ring against that screw. This is a scope stop. This will keep the scope from moving back from the recoil. Some scope mounts have a long pad at the rear of the scope mount that acts the same way. It's usually necessary on high powered rifles not 22's. You most certainly can and should scope your shotguns as long as your state allows the use of scopes on them. I have scopes on all of my shotguns, and especially my slug gun!
Can a scope be mounted on a Remington 582?
Yes, you can mount a scope on a Remington 582 .22 cal. rifle. You will probably need to take off the plastic rear sight. And more than likely you will need high bases if you put on a 1" diameter scope.
